My TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

PleaseDO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site. Thank you.


Copyright Protected

Everything on my blog is Copyright protected

Copyrighted.com Registered & Protected  3EQE-FVJ8-DNWF-OT53

Saturday, September 22, 2018

FTU: A Taste of Halloween



This tutorial was written by me on September 22, 2018. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP 2018 but this tutorial should work with any version.

PTU Tube:  I am using Halloween Witch by Alex Prihodko.  Please do not use this tubes without a proper license.  
You can purchase it at Pics for Design here.  

FTU Kit:  I am using an awesome kit called "A Taste of Halloween" created by MizTeeques .  You can download the kit from her blog here

Mask:  Hw18fecnikek.  Created by Fecnikek.  You can download it here.  Open and minimize in PSP.

FTU Font:  Spooky Wooky.  You can download it from Dafont here.

Plug in: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 75, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x750 transparent image.  We will resize later.

Copy the mask and paste as a new layer.  Resize 23%. Select all, float, defloat and add a new raster layer.

Open paper of choice.  I am using paper 12, copy and close the original.  Standing on the new raster layer, edit, paste into selections.  Select none and delete the original mask layer.  Duplicate and merge down.

Open element 26, copy and close the original.  Select the mask layer and paste.  Resize 45% and move to the top center.  Duplicate and move to the lower right side of the original frame.  Duplicate again and move to the bottom left a little lower then the right side.  Merge down the three frames.  Using your magic wand, click in the center of each frame.  Selections, modify, expand by 10.  Add a new raster layer and move it under the frame.  Open Paper of choice.  I used paper 8, copy and close the original.  Select the new raster layer, edit, paste into selections.  Deselect.

Using your magic wand, click in the lower left frame.  Selections, modify, expand by 10.  Mirror your tube and copy it.  Select the paper layer and paste.  Move the tube until you see the face in the selection.  Once happy with placement, selections, invert and hit delete on the keyboard.  Select none.  Duplicate the tubes face.  Change the blend mode on the bottom tube to soft light and change the blend mode on the top tube to multiply.  Drop shadow the frame and undo the mirror on the original tube.

Open element 69, copy and close the original.  Select the mask layer and paste.  Resize 40% and move to the upper right side of the frame.  Duplicate and merge down.

Open element 61, copy and close the original.  Select the ghost layer and paste.  Resize 50% and move to the upper left corner of the mask.  Drop shadow.

Open element 51, copy and close the original.  Select the frame layer and paste.

Open element 54, copy and close the original.  Select the mask layer and paste.  Resize 40% and move to the upper right of the top frame.  Duplicate and mirror.  Move to the far left just above the bottom frame.  Drop shadow each layer.

Copy merge your main tube, select the sparkle layer and paste.  Resize 40% and move up slightly.  Duplicate.  On the bottom layer, adjust, blur, Gaussian blur set to 5 and click ok.  Change the blend mode to screen.  Drop shadow the top tube.

Open element 48, copy and close the original.  Select the sparkle layer and paste.  Resize 40% and move to the bottom right of the frame.  Drop shadow.

Open element 21, copy and close the original.  Select the cauldron layer and paste.  Resize 30% and again by 80%.  Move to the bottom center.  Drop shadow.

Open element 4, copy and close the original.  Select the cauldron layer and paste.  Resize 35% and move to the bottom left of the frame.  Duplicate and mirror.  Move to the bottom right of the cauldron.  Drop shadow each layer.

Open element 16, copy and close the original.  Select the top pumpkin layer and paste.  Resize 25% and move to the top of the left bottom frame so it looks like he is sitting on it.  Duplicate and change the blend mode to hard light.  Merge down and drop shadow.

Open element 31, copy and close the original.  Select the cauldron layer and paste.  Resize 35% and move to the bottom right so it sits behind the pumpkin.  Duplicate and mirror.  Move up and to the right slightly.  Drop shadow each layer.

Open element 33, copy and close the original.  Select the top layer and paste.  Resize 15% and move to the bottom right so it sits slightly to the left of the pumpkin.  Drop shadow.

Open element 27, copy and close the original.  Select the top pumpkin layer and paste.  Resize 15% and move to the bottom left so it slightly overlaps the pumpkin.  Drop shadow.

Open element 23, copy and close the original.  Select the top pumpkin layer and paste.  Resize 15% and move to the bottom left so it is between the sack and heel of the tube.  Drop shadow.

Open element 3, copy and close the original.  Select the sparkle layer and paste.  Resize 25% and move to the bottom right of the frame, duplicate and mirror.  Move up slightly.  Duplicate again and image free rotate to the left 90 degrees.  Move the layer just above the top pumpkin layer.  Move to the bottom left.  Duplicate and mirror.  Move slightly to the right.  Drop shadow each layer.

Open element 11, copy and close the original.  Select the top vine layer and paste.  Resize 25% and move to the bottom center so it covers the bottom of the books.  Drop shadow.

Open element 22, copy and close the original.  Select the cat layer and paste.  Resize 15% and move to the bottom right.  Drop shadow.

Open element 28, copy and close the original.  Select the poison bottle layer and paste.  Resize 15% and move to the bottom left just in front of the pumpkin.  Drop shadow.

Open element 34, copy and close the original.  Select the sack layer and paste.  Resize 15% and move to the bottom left so it is in front of the sack and poison bottle.  Drop shadow.

Open element 81, copy and close the original.  Select the open book layer and paste.  Resize 15% and move to the bottom right just to the left of the book.  Drop shadow.

Open element 25, copy and close the original.  Select the top layer and paste.  Resize 20% and move to to the bottom center.  Drop shadow.

Add any other elements you like.

Merge visible.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.



0 comments:

Post a Comment

My Blinkie

GWC-Autumn-2019-150x50-final

I CT for

CCDCTFor-vi

SBOFBlinkie

karmalized-CTblinkie-vi

LHDCTBlinkiie
2v2-E2ue-Lqx-Bj-Fy-S
ed-Princess-Scrapsvi-zps771d941b-vi
Elvenstar-Art-Tube-Shop

Followers

Labels