Banner

2v2_J9yg9hx_A9_RH4

I CT for

CCD17-Blinkie-SK-vi

TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site. Thank you.

Copyright Protected

Everything on my blog is Copyright protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

Friday, November 10, 2017

PTU Crown of Keys


This tutorial was written by me on November 10, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using 34-1 Enys Guerrero Tube.  Please do not use this tubes without a proper license.   You can purchase Enys's tubes at CDO here

PTU Kit:  I am using a fantastic matching bundle kit called "Enys Guerrero package 34" created by Foxy Designz.  This kit can only be used with Enys's tubes.  You can purchase this Bundle at CDO here. Check out Foxys Blog here.

Mask:  Mask 6.  Created by Vivienne's Paintbox.  You can download it here.  Click on the mask to enlarge it, right click and save as.  Open and minimize in PSP.

Font of choice

Plug in: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 75, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x800 transparent image.  We will resize later.

Add a new raster layer, select all.  Open paper 2, copy and close the original.  Edit, paste into selection, select none.  Apply mask and merge group.  Resize 95% and mirror.

Open frame 1, copy and close the original.  Select the mask layer and paste.  Resize 85% and move up slightly.  Drop shadow.

Copy your tube and paste.  Resize 75% and move up slightly and drop shadow.

Open element 12, copy and close the original.  Select the mask layer and paste.  Resize 85% and move up to the top and slightly to the right.  Drop shadow.

Open element 33, copy and close the original.  Select the mask layer and paste.  Move to the upper right corner and drop shadow.

Open element 37, copy and close the original.  Select the brick layer and paste.  Resize 60% and move to the upper right corner and drop shadow.

Open element 26, copy and close the original.  Select the frame layer and paste.  Resize 60%, image free rotate to the left 15 degrees and move to the upper left corner.  Drop shadow.

Open element 3, copy and close the original.  Select the mask layer and paste.  Resize 60% and move to the far left about midway.  Duplicate and move to the bottom right corner.

Open element 7, copy and close the original.  Select the branch layer and paste.  Resize 80%, image free rotate to the right 15 degrees.  Move to the upper right and arrange both layers so they are behind the tube.  Drop shadow each layer.

Open element 41, copy and close the original.  Select the top leaf layer and paste.  Resize 40% and move to the far left about halfway down and drop shadow.

Open element 1, copy and close the original.  Select the top leaf layer and paste.  Resize 35% and move to the upper right so it peeks out from behind the tubes shoulder and hair.  Drop shadow.

Open element 36, copy and close the original.  Select the star layer and paste.  Resize 60% and mirror.  Move to the left so it peeks out from behind the tube and clock.  Drop shadow.

Open element 31, copy and close the original.  Select the mesh flower layer and paste.  Resize 40%, mirror, image free rotate to the right 15 degrees and move to the upper left so it is covering the mesh flower and you can see the purple flower peeking out.  Drop shadow.

Open element 5, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the bottom center.  Drop shadow.

Open element 23, copy and close the original.  Select the tube layer and paste.  Resize 60%, image free rotate, to the right 15 degrees.  Move to the right so it covers the edge of the tube.  Drop shadow.

Open element 21, copy and close the original.  Select the ribbon layer and paste.  Resize 40% and move to the bottom right and drop shadow.

Open element 18, copy and close the original.  Select the ribbon layer and paste.  Resize 20% and move to the bottom right so it covers the violin but peeks out from the bottle.  Drop shadow.

Open element 29, copy and close the original.  Select the tube layer and paste.  Resize 40%, image free rotate 90 degrees to the right.  Move under the violin on the right.  Duplicate and mirror.  Image free rotate to the right 20 degrees.  Move this layer under the tube layer and move to the left so it covers the bottom of the clock.  Drop shadow each layer.

Open element 38, copy and close the original.  Select the black rose layer and paste.  Resize 60% and move to the bottom so it is peeking out from the bottle.  Drop shadow.

Open element 30, copy and close the original.  Select the black rose layer and paste.  Resize 25% and move to the bottom just left of the snake.  Drop shadow.

Open element 49, copy and close the original.  Select the Ribbon layer and paste.  Resize 60% and move to the bottom center.  Duplicate and merge down.  Duplicate again and move to the upper right and move this layer under the tube layer.  Duplicate and mirror.

Open element 52, copy and close the original.  Select the top layer and paste.  Resize 50% and move to the bottom slightly to the left of the bottle.  Drop shadow.

Open element 17, copy and close the original.  Select the bottle layer and paste.  Resize 30% and move to the bottom so it is in front of the bottom of the bottle.  Drop shadow.

Open element 20, copy and close the original.  Select the bottle layer and paste.  Resize 30% and move to the bottom right.  Drop shadow.

Add any other elements you like.

Merge visible.

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.



0 comments:

Post a Comment

Search This Blog

Followers

Popular Posts