Banner

2v2_J9yg9hx_A9_RH4

I CT for

CCD17-Blinkie-SK-vi

TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site. Thank you.

Copyright Protected

Everything on my blog is Copyright protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

Sunday, October 22, 2017

PTU: Who's a Witch



This tutorial was written by me on October 22, 2017. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have a working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using Enys Guerrero Oct Bonus tube.  If you spend $10 or more on Enys Guerrero's tubes during the month of October you can get this beauty. Please do not use this tubes without a proper license.  
You can purchase Enys's tubes at CDO here

PTU Kit:  I am using an awesome matching kit called "IB-EnysGuerrero-Oct2017" created by Foxy Designz.  You can purchase this kit at CDO here. Check out Foxys Blog here.

Mask:  Mask 37 & 38.  Created by Vivienne's Paintbox.  You can download it here.  Click on the mask to enlarge it, right click and save as.  Open and minimize in PSP.

I am using Season of the Witch Font for my name.

Plug in: None

I am using a drop shadow (D/S) of V 0 H 5, Opacity 85, blur 10, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 750x750 transparent image.  We will resize later.

Open paper 2, copy and close the original.  Select Raster 1 and add a new layer.  Select all, standing on the new layer, edit, paste into selection.  Select none.  Layers, New mask layer, from image, Find Vivienne's mask 38 in the drop down and click ok.  Merge group.  Repeat the above steps but use paper 1.  Move this layer under the first mask layer.  Resize 90% all layers not checked.

Copy the girl only tube.  Select the bottom mask layer and paste.  Image, mirror.  Move to the upper right so you see her face in the top part of the mask.  Select the mask layer, select all, float, defloat, invert.  Standing on your tube layer, hit delete on your keyboard.  Select none.  Erase the bottom part of the tube as you only want the face showing.  Change the blend mode to hard light on the tube and lower the opacity to 70.

Select the top mask layer and paste again.  Your tube should still be in the memory, Resize 60% and drop shadow.

Open element 15, copy and close the original.  Select the top mask layer and paste.  Resize 70% and move to the bottom right so it beside the tube.  Drop shadow.

Open element 6, copy and close the original.  Select the top mask layer and paste.  Resize 90% and move to the bottom left so the trunk is beside the tube.  Drop shadow.

Open element 4, copy and close the original.  Select the top mask layer and paste.  Resize 90% and move to the upper left corner.  Drop shadow.

Open element 1, copy and close the original.  Select the top mask layer and paste.  Change the blend mode to Hard light.

Open element 3, copy and close the original.  Select the tree layer and paste.  Resize 50% and move to the left side and you should still see the roots of the tree.  Drop shadow.

Open element 7, copy and close the original.  Select the tube layer and paste.  Resize 40% and move to the bottom left so it covers the top rough edge of the tube.  Drop shadow.

Open element 14, copy and close the original.  Select the web layer and paste.  Resize 40% and move to the right so part of it shows over the cauldron.  Drop shadow.

Open element 16, copy and close the original.  Select the top layer and paste.  Resize 20% and move to the bottom left in front of the books.  Duplicate and mirror.  Drop shadow each layer.

Open element 5, copy and close the original.  Select the tube layer and paste.  Resize 40% and move to the bottom in front of the tubes feet.  Drop shadow.

Open element 12, copy and close the original.  Select the tube layer and paste.  Resize 20% and move to the bottom between the two books.  Drop shadow.

Open element 8, copy and close the original.  Select the top layer and paste.  Resize 20% and move to the bottom so it is between the rose and flat book.  Drop shadow.

Open element 10, copy and close the original.  Select the top layer and paste.  Resize 20% and move to the bottom so it is in front of the flat book.  Drop shadow.

Open element 9, copy and close the original.  Select the top rose layer and paste.  Resize 20% and move to the bottom between the feather and powder.  Drop shadow.

Open element 13, copy and close the original. Select the web layer and paste.  Resize 40% and move to the right about midway.  Duplicate and mirror.  Resize the duplicate by 70% and move above the windmill layer.  Move to the upper left.  Drop shadow each layer.

Add any other elements you like.

Merge visible.

Select the crop tool and in the toolbar, select the merge opaque box.  and click ok

Image, resize by 600 pixels on the longest side, all layers checked.

Adjust sharpness, Unsharpen mask, radius and clipping set to 5 and strength set to 30.  Click ok.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.



0 comments:

Post a Comment

Search This Blog

Followers

Popular Posts