My TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site. Thank you.

Copyright Protected

Everything on my blog is Copyright protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

My Blog List

Monday, February 9, 2015

PTU: Captured


This tutorial was written by me on February 9, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube Called Morticia created by SpazzdArt.  Please do not use her tubes without a proper licence.  You can purchase this beauty at her store here.   

PTU Kit:  I am using an awesome kit called Dark and Luxurious by Kissing Kate.  This beautiful kit has 70 elements, 4 frames and 10 papers.  You can purchase this kit at Spazzdart here

Mask:  WSL Mask 117.  You can download it from her blog here.  Thank you for the awesome masks.  Open the mask in psp and minimize.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

Open paper of choice.  I am using paper 3, copy and close the original.  Paste as a new layer.  Apply WSL mask 117 and merge group.  Resize 105% all layers not checked.

Copy your tube and paste as a new layer.  Resize 20% and drop shadow.

Open frame 3, copy and close the original.  Select the mask layer and paste.  Resize 40%.  Image, free rotate to the left 90 degrees all layers not checked.  Using your magic wand, click inside the frame.  Selections, modify, expand by 3  Open paper of choice.  I am using paper 2.  Select the mask layer and paste.  Copy and paste your tube and resize 60%.  Move so her face is in the frame.  Selections, invert and hit delete on the keyboard.  Select the paper layer and repeat the delete.  Change the blend mode on the tube layer to hard light and drop shadow the frame.  

Hide the main tube, mask layer and raster 1.  Merge visible.  Made all your layers visible again.  Select the frame layer.  Image, free rotate to the right 20 degrees all layers not checked.  Move to the right.  See mine for placement.

Open element 34, copy and close the original.  Select the mask layer and paste.  Move up slightly.

Open element 64, copy and close the original.  Select the fence layer and paste.  Resize 80% and drop shadow.

OPen element 27, copy and close the original.  Select the frame layer and paste.  Resize 70% and move to the upper left corner.  Drop shadow.

Open element 7, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the bottom right corner in front of the frame.  Drop shadow.  see mine for placement.

Open element 11, copy and close the original.  Select the frame layer and paste.  Resize 40%, drop shadow and mirror.  Move down to the bottom right under the rose.  See mine for placement.

Open element 14, copy and close the original.  Select the top layer and paste.  Resize 40% and drop shadow.  Move to the bottom right corner.  See mine for placement.

Open element 48, copy and close the original.  Select the frame layer and paste.  Resize 70% and move down so it is peaking out from the rose.  Drop shadow.  See mine for placement.

Open element 54, copy and close the original.  Select the heart layer and paste.

Open element 67, copy and close the original.  Select the top layer and paste.  Resize 30% and move to the bottom left corner.  Drop shadow.  See mine for placement.

Open element 17, copy and close the original.  Select the top rose layer and paste.  Resize 40% and mirror.  Move to the bottom left corner.  Drop shadow.  See mine for placement.

Open element 29, copy and close the original.  Select the bottom rose layer and paste.  Resize 40% and move to the far bottom left corner so it is peaking out from behind the rose.  See mine for placement.  Drop shadow.

Open element 69, copy and close the original.  Select the bottom rose layer and paste.  Resize 35% and move to the left middle so it is peaking out from behind the rose and cup.  Using your deform tool, turn it slightly to the left.  Drop shadow.  See mine for placement.

Open element 70, copy and close the original.  Select the top rose layer and paste.  Image flip and mirror.

Open element 59, copy and close the original.  Select the black box layer and paste.  Resize 60% and move to the bottom center.  See mine for placement.  Drop shadow.

Add any other elements you like.  

Add your copyright and name.  Save as png. 

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Wednesday, February 4, 2015

PTU: Angel of Hearts


This tutorial was written by me on February 4, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous Bonus tube for Valerie created by SpazzdArt.  Please do not use her tubes without a proper licence.  You can purchase this beauty at her store here.  (the Bonus tube is included in the Kit) 

PTU Kit:  I am using an awesome kit called Red Hot Love by Kizzed by Kelz.  This beautiful kit has 118 elements and 16 papers.  Bonus Tube is included in this kit .  You can purchase this gorgeous kit at Spazzdart here

Mask:  WSL Mask 223.  You can download it from her blog here.  Thank you for the awesome masks.  Open the mask in psp and minimize.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

Open element 108, copy and close the original.  Select raster 1 and paste.  Resize 50% and move to the upper left corner.  Duplicate and move to the bottom right corner.  the frames should over lap in the bottom and upper corners.  See mine for placement.  Merge down.  Using your magic wand, click inside the top and bottom frames.  Selections, modify, expand by 5.  Open paper of choice,  I am using paper 6, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.  Do not deselect.  Copy your tube and paste.  Resize 20% and move to the bottom frame so her face shows.  Hit delete on your keyboard.  Duplicate and move to the upper frame.  Hit delete again.  Select none.  Mirror the upper tube and move back into the  frame.  Merge the 2 tube layers down and change the blend mode to luminance legacy.  Move the tube and paper layers under the frame and drop shadow the frames.

Select the top layer and paste.  Your tube will still be in the memory.  Resize 15% and move over slightly to the right.  Drop shadow.

Open paper of choice.  I am using paper 14, copy and close the original.  Select raster 1 and paste.  Apply mask WSL 223 and merge group.

Open element 95, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the bottom right and drop shadow.  See mine for placement.

Open element 44, copy and close the original.  Select the mask layer and paste.  Move to the right so it is peaking out from the bottom frame.  See mine for placement.  Drop shadow.

Open element 1, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the left so it is covering the bottom left frame.  Drop shadow.  See mine for placement.

Open element 93, copy and close the original.  Select the frame layer and paste.  Resize 30% and move to the upper left corner of the top frame.  Using your deform tool, turn the ribbon to the left slightly.  see mine for placement.  Drop shadow, mirror and move to the upper right corner of the right frame.

Open element 49, copy and close the original.  Select the top layer and paste.  Resize 50% and move to the bottom left.  Using your deform tool, tilt to the left.  See mine for placement.  Drop shadow.

Open element 60, copy and close the original.  Select the top layer and paste.  Resize 30% and move to the bottom left just in front of the mp3 player.  Drop shadow.  See mine for placement.

Open element 16, copy and close the original.  Select the frame layer and paste.

Open element 43, copy and close the original.  Select the frame layer and paste.  Resize 35% and move to the bottom right.  See mine for placement.   Drop shadow.

Open element 52, copy and close the original.  Select the tube layer and paste.  Resize 20% and move to the bottom right so it is peaking out from behind the lipstick.

Add any other elements you like.  

Add your copyright and name.  Save as png. 

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Tuesday, February 3, 2015

PTU: In the Darkness

This tutorial was written by me on February 3, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called Amber created by SpazzdArt.  Please do not use her tubes without a proper licence.  You can purchase this beauty at her store here.  

PTU Kit:  I am using the matching kit to Amber called Amber.  This beautiful kit was created by Foxy's Designz .  You can purchase this gorgeous kit at Spazzdart here.. 

Mask:  WSL Mask 222.  You can download it from her blog here.  Thank you for the awesome masks.  Open the mask in psp and minimize.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

copy your tube and paste as a new layer.  Resize 17% and drop shadow.  Move down slightly.

Open paper of choice.  I am using paper 2, copy and close the original.  Select raster 1 and paste as a new layer.  Apply WSL Mask 222 and merge group.

Open element 39, copy and close the original.  Select the mask layer and paste.  Move up slightly.

Open element 34, copy and close the original.  Select the moon layer and paste.  Move to the left.  See mine for placement.  Drop shadow.

Open element 35, copy and close the original.  Select the moon layer and paste.  Resize 90% and drop shadow.  Move up.  See mine for placement.

Open element 31, copy and close the original.  Select the top layer and paste.  Resize 60% and move down to the right so it is in front of the tubes foot.

Open element 5, copy and close the original.  Select the mask layer and paste.  Resize 60% and drop shadow.

Open element 12, copy and close the original.  Select the tube layer and paste.  Resize 60% and move to the bottom slightly to the left.  Drop shadow.

Open element 20, copy and close the original.  Select the tree layer and paste.  Resize 30% and move to the bottom left in front of the tree.  See mine for placement.  Drop shadow.

Open element 10, copy and close the original.  Select the chain link layer and paste.  Resize 80% and move to the bottom.

Open element 11, copy and close the original.  Select the lantern layer and paste.  Move to the bottom right so it is peaking out from behind her foot.

Open element 21, copy and close the original.  Select the tree layer and paste.  Image, free rotate to the left 90 Degrees.  Move to the bottom left.  Duplicate and mirror.  Move slightly to the right.

Open element 19, copy and close the original.  Select the bead layer and paste.  Resize 40% and move to the bottom left so it is in front of the lantern and peaking out from behind the crow.

Open element 28, copy and close the original.  Select the top left layer and paste.  Move to the bottom left.  Duplicate and mirror move down slightly.

Add your copyright and name.  Save as png. 

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Search This Blog

My Blinkie

GWC-Autumn-2019-150x50-final

Followers

Labels