My TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site. Thank you.

Copyright Protected

Everything on my blog is Copyright protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

Saturday, May 25, 2013

PTU: To Toxic for you


This tutorial was written by me on May 25, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Artist:  I am using the awesome artwork of Elias Chatzoudis. You can purchase this beauty at his store here. Please do not use his artwork with out a proper license.

PTU Scrap kit:  I am using a gorgeous kit called Toxic Love by Foxy Designz.  You can check it over at Foxy's blog here.  You can purchase it here.

Mask: WSL Mask 302.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent raster image.

Open frame 5, copy and close the original.  Paste as a new layer and resize 70%.

Open your main tube and paste as a new layer.  Resize 90% and drop shadow.

Back to the frame.  Using your magic wand, click inside the frame. Ensure that you click in the spots around the edge where you don't see the dancing ants.  Selections, invert and using your eraser tool, erase the bottom of the tube.  Selections, invert.  Selections, modify, expand by 5.  Open paper of choice, I am using paper 12, copy and paste as a new layer.  Selections, invert, and hit delete on your keyboard.  Select none.  Drop shadow the frame and move the paper under the frame layer.

Open Mesh, copy and close the original.  Select raster 1 and paste.  Resize 70%.

Open sparkles, copy and close the original.  Select your tube layer and paste.  Resize 70% and move down slightly.

Open flower 1, copy and close the original.  Select the top layer and paste.  Resize 15% and move to the bottom left.  See mine for placement.

Open flower 2, copy and close the original.  select the sparkles layer and paste.  Resize 15% and move to the left middle.  Duplicate and bring this layer to the top.  Move down so the green flower is in between.  See mine for placement.

Open goblet 1, copy and close the original.  Select the top layer and paste.  Resize 30% and move to the bottom middle slighly off to the right.  See mine for placement.

Open skull, copy and close the original.  Select the top layer and paste.  Resize 40% and move down and in the middle.  Move slightly to the right so it is overlaping the goblet.  See mine for placement.

Open streamer 2, copy and close the original.  Select the frame layer and paste.  Duplicate and move this layer above the goblet layer.  Resize 40% and move down and over to the left.  See mine for placement.  I moved my black flower layer up so the streamer is under it.

Open toxic sign, copy and close the original.  Select the sparkle layer and paste.  Resize 40% and move to the bottom right.

Open seal2 layer, copy and close the original.  Select the sign layer and paste.  Resize 35% and move down and to the right.  See mine for placement.

Open Butterfly, copy and close the original.  Select the top layer and paste.  Resize 25% and move to the top left of the frame.  I used my deform tool to tilt slighly to the right.  Duplicate and mirror.  Move this just to the top of the toxic sign.

Open chain, copy and close the original.  Select the paper layer and paste.  Resize 60%.

Open heart wings, copy and close the original.  Select the mesh layer and paste.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial and I would love to see your results.

Hugs,

Gwils
Sunday, May 19, 2013

PTU: My Love


This tutorial was written by me on May 19, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Anna Marine.  Please do not use This artwork without a  proper license.  You can purchase this very cute tube at CDO here.

PTU scrap kit:  I am using Goth Inspired by Rebel Dezigns Scraps.  Thank you for creating this gorgeous kit.  You can purchase this gorgeous kit at CDO here.

Check out Rebel's blog here.  She has some awesome stuff on there go check it out.

Mask: Vix big mask 5.  You can get it at Vix's blog here.    Thank you vix for your awesome masks.

Plug ins: None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 1, copy and paste as a new layer.  Resize 80%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 5.  Open paper of choice.  I am using paper 2, paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none.  Move the paper layer under the frame and drop shadow the frame.

Open your tube and paste as a new layer.  Resize 90% and drop shadow.

Open element 48, copy and close the original.  Select raster 1 and paste as a new layer.

Open element 32, copy and close the original.  Select raster 1 and paste as a new layer.  Move to the top center.  See mine for placement.

Open element 22, copy and close the original.  Select the heart layer and paste.  Duplicate and mirror.

Open element 25, copy and close the original   Select the top layer and paste.  Resize 50%.  Mirror and move to the bottom left.  Drop shadow.

Open element 58, copy and cclose the original.  Select the top layer and paste.  Resize 40% and move to the left.  Just in front of the fiddle.  Duplicate and mirror.  Move this up slightly and under the tube.  See mine for placement.

Open element 2, copy and close the original.  Select your fiddle layer and paste.  Resize 50% and move to the far bottom left.  See mine for placement.

Open element 18, copy and close the original.  Select the tube layer and paste.  Resize 50% and mirror.  Move down to the left bottom corner.  Duplicate and move this towards the right slightly.  See mine for  placement.

open element 39, copy and close the original.  Select the frame layer and paste.  Resize 50% and move to the bottom right corner.  See mine for placements.  Duplicate and bring this layer just above the leaves layer.  Resize 60% and move down to the center between the bat wing and fiddle.  See mine for placement.

Select raster 1 and paste paper of choice.  I am using paper 6, Layers, load/save mask, load mask from disk and find Vix big mask 5.

 Apply your mask and merge group.

Add your name and copyright.  Save as png and close.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Sunday, May 12, 2013

PTU: Raspberry Delight


This tutorial was written by me on May 12, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Artist:  I am using the awesome artwork of PinUp Toons. You can puchase this tube at CDO here.

PTU Scrap kit:  I am using a gorgeous kit called Raspberry by Foxy Designz.  This is part of the Ice Cream Flavor collab.  You can purchase this kit at CDO here.

Visit Foxy's blog here to see all the fantastic stuff she has to offer.

Mask: WSL Mask 84.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

open Frame 1, copy and close the original.  Paste as a new layer and resize 70%.  Using your magic wand, click inside the frame.  Selections Modify, expand by 5.  Open paper of choice. I am using paper 5, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.   Select none.  Move your paper layer under the frame and drop shadow the frame. 

Copy your tube.  Select the top layer and paste as a new layer.  Using the magic wand, click inside the frame.  Selections, invert.  Standing on your tube layer, use your eraser tool and erase the bottom portion of the tube.  Select none and drop shadow the tube.

Open element 17, copy and close the original.  Select the frame layer and paste.  Move to the far left.

Open element 1, copy and close the original.  Select the top layer and paste.  Resize 40% and again by 80% and move to the bottom left on top of the leaf stem.

Open element 4, copy and close the original.  Select the leaf layer and paste.  Resize 40% and move to the bottom left.

Open element 2, copy and close the original.  Select the tube layer and paste.  Resize 30% and move to the bottom left under the rose.  See mine for placement.

Open element 3, copy and close the original.  Select the top layer and paste.  Resize 20% and move to the bottom left in front of the rose.  See mine for placement.

Open element 9, copy and close the original.  Select the leaf layer and paste.  Resize 30% and move to the upper left corner.

Open element 11, copy and close the original.  Select your top layer and paste:  Resize 40% and move to the bottom right corner.  I used my deform tool to place a slight tilt to the right.

Open element 9, copy and close the original.  Select the tube layer and paste.  Resize 30% and move to the bottom middle.

Open element 10, copy and close the original.  Select the cone layer and paste.  Resize 30% and move to the bottom right.  See mine for placement.

Open element 8, copy and close the original.  Select the frame layer and paste.  Resize 80% and move to the lower right.  See mine for placement.

Open element element 5, copy and close the original.  Select the frame layer and paste.  Resize 60%.

open element 9, copy and close the original.  Select the leaf layer and paste.  Resize 60% and move to the bottom left.  I used the deform tool to place a slight tilt to the left.  See mine for placement.

Open wordart.  Copy and close the original.  select the icing rose layer and paste.  Resize 60% and move to the bottom.  Drop shadow.

Open element 15, copy and close the original.  Select the ribbon layer and paste.  Resize 40% and move to the right middle side.  See mien for placement.

Select raster 1, open paper of choice.  I am using paper 3, copy and paste as a new layer.  Apply mask and merge group.  Duplicate, mirror and flip. 

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial and I would love to see your results.

Hugs,

Gwils

PTU: Funky Music


This tutorial was written by me on May 11, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

CDO Artist - Bundle Pack:  I am using PinUp Toons Package 171.  It contains the awesome artwork of PinUp Toons and fantastic kit by Foxy Desinz  You can purchase this bundle pack at CDO here

Visit Foxy's blog here to see all the fantastic stuff she has to offer.

Mask: WSL Mask 116.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: None

Font:  Pump Demi bold LE for the word art or a fat letter font.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

open Frame 1, copy and close the original.  Paste as a new layer and resize 70%.  Using your magic wand, click inside the frame.  Selections Modify, expand by 5.  Open paper of choice. I am using paper 9, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.  Copy your close up tube and paste as a new layer.  Move into a spot you like and hit delete on your keyboard.  Select none.  Move your tube layer and paper layer under the frame and drop shadow the frame.  change the blend mode on the tube layer to soft light.

Open element 20, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the bottom left corner.  Drop shadow.

Open element 26, copy and close the original.  Select the cat stand layer and paste.  Resize 40% and mirror.  Move the cat so it looks like he is sitting on one of the pedestals.  I have her on the middle one.  Drop shadow.

Copy your main tube and paste as a new layer.  Move to the right and drop shadow.

Open element 3, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the bottom middle.  Drop shadow.

Open element 12, copy and close the original.  Select the radio layer and paste.  Resize 70% and move slightly to the right.  See mine for placement.  Duplicate and mirror.  Move this layer under your frame layer.

Open element 35, copy and close the original.  Select the frame layer and paste.  Resize 60% and move to the bottom left corner.  Duplicate and mirror.

Open element 22, copy and close the original.  Select raster 1 and paste.  Resize 60% and move to the upper right corner.  See mine for placement.

Open element 21, copy and close the original.  Select the frame layer and paste.  Resize 70% and move to the upper right corner.

Open element 6, copy and close the original.  Select the record layer and paste.  Move to the far left, duplicate and mirror.  Duplicate again and move to the bottom middle.

Open element 32, copy and close the original.  Select the frame layer and paste.  Resize 60% and move to the upper frame.

Select raster 1, copy paper of choice.  I am using paper 2, paste as a new layer and apply mask. 

Select the top layer.  Using your bulk font, type out word art of choice and add a bevel.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial and I would love to see your results.

Hugs,

Gwils
Saturday, May 11, 2013

PTU: Chocolate chip



This tutorial was written by me on May 11, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Maryline Cazenave.  Please do not use this artwork without a  proper license.  You can purchase this very cute tube at CDO here

PTU scrap kit:  I am using Icecream Flavors Chocolate Chip by Rebel  Dezigns Scraps.  Thank you for creating this gorgeous kit.  You can purchase this gorgeous kit at CDO here

Check out Rebel's blog here.   Rebel has a lot to offer so go check it out.

Mask: None

Plug ins: eyecandy 4000 Gradient glow

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 815x315 transparent image.

Open paper of choice.  I am using paper 4, Copy, select all and paste into selections.  Select none.

Open word art, copy and close the original.  Paste as a new layer and reszie 60%.  Move down slightly.  Eyecandy Gradient glow.  Basic tab Glow Width 5 everything else stays the same on this tab.  Color
tab, chang the color to #81645a.

Open your tube and paste as a new layer.  Move to the far right and drop shadow.

Open element 15, copy and close the original.  Select your top layer and paste.  Resize 60% and move to the far left.  Drop shadow.

Open element 14, copy and close the orignal.  Select the paper layer and paste as a new layer.  Resize 60% and move to the bottom right corner behind the pup.  Duplicate and mirror.  Move to the upper left corner.

Open element 9, copy and close the original.  Select the top layer and paste.  Resize 40% and move to the bottm left corner just in front of the cone.  See mine for placement.

Open element 20, copy and close the original.  Select the top cookie layer and paste.  Move to the far left under the cone.  See mine for placement.  Duplicate and mirror.

Open element 3, copy and close the original.  Select the Wordart layer and paste.  Move to the far left.  See mine for placement.

Open element 5, copy and close the original.  Select the paper layer and paste.  Move this down to the bottom middle.

Open element 4, copy and close the original.  Select the paper layer and move to the far upper right corner.  See Mine for placement.

Merge visable and duplicate your banner, Shift + D and minimize for now.

Back to the original.  Add a new raster layer and flood fill with #37100b or color of choice.  Select all, selections, contract by 5, and hit delete on  your keyboard.  Select none.  Adjust, add remove
noise, add nosie, Gaussian, 50% and monochrome checked.

Add your name and copyright.  Save as png and close.

Avatar

Maximize the duplicate.  Resize 70% all layers checked.

Select your crop tool and crop to width and height of 180x180.

Add a new layer and flood fill with #37100b and repeat the steps for the frame above.

Add your name and copyright.  Save as png and close.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Wednesday, May 8, 2013

PTU: Cup of Tears



This tutorial was written by me on May 8, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

Animation Shop

PTU Tube:  I am using the fantastic artwork of Martin Abel  Please do not use his artwork without a  proper license.  You can puchase this gorgeous tube at CDO here.

PTU scrap kit:  I am using Inspired by Martin Abel 30-2 by Foxy Designz Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.

Visit Foxy's blog here to see all the awesome stuff she has to offer.

Mask: WSL Mask 56.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: Xenofex 2, constellation

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Copy your tube and paste as a new layer.  Drop shadow.

Open element 9, copy and close the original.  Select the raster 1 and paste as a new layer.  Resize 60% and move down and to the right.  Image mirror.

Open element 8, copy and close the original  Select raster 1 and paste as a new layer.  Resize 60%

open element 7, copy and close the original.  Select your top layer and paste.  Image resize 30% and move to the bottom right corner.  Drop shadow.

Open element 2, copy and close the original.  Select the top layer and paste.  Resize 30% and move to the left bottom corner.

Open the goblet - copy and close the original.  Select the cat layer and paste as a new layer.  Resize 30% and move to the bottom left corner.  See mine for placement.

Open element 5, copy and close the original.  Select the web layer and paste.

Open element 4, copy and close the original.  select the top layer and paste.  Resize 30% and  move to the upper left corner.

Select raster 1, open paper of choice.  I am using paper 5, copy and paste as a new layer.  Layers,  load/save mask, load mask from disk and find WSL mask 56.  Apply your mask and merge group.  Resize 110%

Add any other elements you like.

Add your name and copyright. If you do not want to animate, save as PNG.

Animations.

Select raster 1 and flood fill it white.

Select your web layer and apply xenofex 2 constellations with the following settings:

Edit, copy special, copy merged.

Open animation shop and paste as new animation ctrl + V.

Back to psps.  Hit ctrl + Z to undo the constellation.

Apply constellation again but click random seed.

Edit, copy special, copy merged.

Open animation shop and paste after current frame. ctrl + shift + L.

Back to psps.  Hit ctrl + Z to undo the constellation.

Apply constellation again but click random seed.

Edit, copy special, copy merged.

Open animation shop and paste after current frame. ctrl + shift + L.

View your animation and save as gif.

I hope you have enjoyed my tutorial and I would love to see your results.

Hugs,

Gwils
Tuesday, May 7, 2013

PTU: Floral Fantasy


This tutorial was written by me on May 7, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

Animation shop

PTU Tube:  I am using the gorgeous artwork of Jessica Dougherty.  Please do not use her artwork without a  proper license. I purchased mine through CILM.  You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Inspired by Jessica Dougherty 24-1 by Chichi Designz.  Thank you for creating this gorgeous kit.  You can purchase this at CDO here.  

Check out Chichi's blog here to see all the awesome things she has to offer.

Mask WSL_Mask255.  You can download this at weescotslass Creations here.  Thank you for the great masks.

Plug ins: eyecandy 4000, gradient glow.
      Xenofex 2, Constellations

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open pape of choice.  I am using paper 6, copy and paste as a new layer.  Layers, load/save mask, load mask from disk.  Find WSL mask 255 and apply.  Merge group.

Copy your tube and paste as a new layer.  Drop shadow.

Open scarf, copy and close the original.  Select your top layer and paste.  Resize 70% and mirror.  Move down to the bottom.

Open Butterflies, copy and close the original.  Select the Mask layer and paste.  Resize 70% and move to the right.  Drop shadow.  See mine for placement.

Open branch, copy and close the original.  Select the butterfly layer and paste.  Resize 70% and move to the bottom right.  Duplicate and mirror.  See mine for placement.

Open Tree, copy and close the original.  Select your Mask layer and paste as a new layer.  Resize 90% and move to the right.  See mine for placement.

Open Sun, copy and close the original.  Select your mask layer and paste.  Move to the upper left corner.

Open sparkle trail, copy and close the original.  Select the sun layer and paste as a new layer.  Resize 70% and move to the upper left corner.  Duplicate, mirror and flip. Merge down.

Open wordart 1, copy and close the original.  Select your top layer and paste.  Resize 70% and move to the bottom. Eyecandy gradient glow.  Basic tab, change the glow width to 5, color tab, click medium and click ok.

Open Leaf trail, copy and close the original.  Select your mask layer and paste.  Resize 90%.  Duplicate and mirror.  Using your eraser tool, erase the top leaves on the left until you reach the larger butterfly.

Add your copyright and name.  If you do not want to animate, save as png.

Animation,

Select raster 1 and flood fill it with white.

Select the sparkle trail layer and apply xenofex 2 constellation with the following settings:

Click on image for larger preview
Edit, copy special, copy merged and open animation shop and paste as new animation.  Back to psp.  hit ctrl + z to under the constellation. 

Apply the constellation again but hit random seed.  edit, copy special, copy merged and paste in animation shop after current frame.  Ctrl + shift + L.

Back to psp and hit ctrl + z to under the constellation.

Repeat the constellation again but hit random seed.  Edit, copy special copy merged and back to animation shop.  Paste after current frame or ctrl + shift + L.

Still in animation shop.  hit Ctrl + A to select all the frames.  Animation, frame properties and change the display time to 15.  view your animation and save as gif.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Saturday, May 4, 2013

PTU: Pirates Life


This tutorial was written by me on May 5, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Gaetano DiFalco.  Please do not use his artwork without a  proper license.  You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Inspired by Gaetano DiFalco 5-3 by Foxy Designz Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here

Visit Foxy's blog here to see all the awesome stuff she has to offer.

Mask: WSL Mask 243.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Copy paper of choice.  I am using paper 4, paste as a new layer.  Layers, load/save mask, load mask from disk and find WSL Mask 243.  Apply mask and merge group.

Copy your main tube and paste as a new layer.  Drop shadow.  Move slightly to the right.

Open word art 1, copy and paste as a new layer.  Resize 60% and move to the Top middle.  Drop shadow V/H 1 Opacity 100, blur 1 color #ffffb4. Repeat drop shadow but change the V/H to -1.

Open element 7, copy and close the original.  Select your mask layer and paste as a new layer.

Open element 2, copy and close the original.  Select your mask layer and paste as a new layer.  Resize 70% and move to the Right. 

Open element 16, copy and close the original.  Select the flag layer and paste as a new layer.  Resize 40% and move to the upper right corner and drop shadow V/H 1 Opacity 100, blur 1 color #ffffb4.  Repeat drop shadow but change the V/H to -1.

Open element 3, copy and close the original.  Select the tree layer and paste as a new layer.  Resize 60% and mirror.  Move to the bottom right side.  See mine for placement.

Open element 20, copy and close the original.  Select the chest layer and paste as a new layer.  Resize 40% and move to the bottom middle.  See mine for placement.

Open element 4, copy and close the original.  Select the chest layer and paste as a new layer.  Resize 30% and move to the bottom left but tuck the map slightly behind the skulls.

Open element 10, copy and close the original.  Select the skull layer and paste as a new layer.  Resize 40% and move to the bottom left corner.

Open element 15, copy and close the original.  Select the flag layer and paste as a new layer.  Resize 40% and move to the far left.

Open element 13, copy and close the original. Select your tube layer and paste as a new layer.  Resize 30% and move to the bottom left corner.   Duplicate and mirror.

Open element 14, copy and close the original.  Select the duplicate flower layer and paste as a new layer.  Resize 25% and move to the bottom left slightly right of the flower.  See mine foe placement. 

Duplicate and mirror.

Open element 8, copy and close the original.  Select your tube layer and paste as  new layer.  Resize 70% and move to the bottom middle.  See mine for placement.

Add any other elements you like.

Add your name and copyright.  Save as PNG.

I hope you have enjoyed my tutorial and I would love to see your results.

Hugs,

Gwils
Friday, May 3, 2013

PTU: Pink n Black


This tutorial was written by me on May 3, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed.

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Michi Please do not use this artwork without a  proper license.    You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Goth Meets Pink by Rebel Dezigns Scraps.  Thank you for creating this gorgeous kit.  You can purchase this gorgeous kit at CDO here

Check out Rebel's blog here to see all the awesome things she has to offer. 

Mask: None

Plug ins: eyecandy gradient glow.  HSB Noise.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 1, copy and paste as a new layer.  Resize 70%.  Using your magic wand, click inside the frame. 

Copy your close up tube and paste as a new layer.  Resize 70%  Selections, invert and carefully erase the bottom part of your tube but leave the elbows. 

Selections, invert, selections, modify, expand by 5.  Open paper of choice.  I am using paper 1, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.  select none.  Move the paper layer under the frame.

Drop shadow your tube and frame.

Open element 22, copy and close the original.  Paste as a new layer and resize 60%.  Move this to the bottom middle.  See mine for placement.

Open element 15, copy and close the original.  Select raster 1 and paste as a new layer.  Move this up slightly so you see the feathers over the top of the frame.

Open element 13, copy and close the original.  Select the peacock layer and paste as a new layer.  Resize 50% and move to the left bottom corner.  Duplicate and mirror.

Open element 1, copy and close the original.  Select the top leaf layer and paste as a new layer.  Move over to the left.  Duplicate, Mirror and flip.  Move this layer above your frame layer.

Open element 12, copy and close the original.  Select the top layer and paste as a new layer.  Resize 25% and move to the bottom right so it looks like it is sitting on the rose.  Drop shadow.

Open element 23, copy and close the original.  Select the top layer and paste.  Resize 50% and mirror.  Move this to the bottom left corner.  See mine for placement.  Drop shadow.

Open element 26, copy and close the original.  Select the peacock layer and paste as a new layer.  Move to the upper left corner.  Duplicate and mirror.

Open element 8, copy and close the original.  Select your leaf layer and paste as a new layer.  Resize 40% and move to the left side.  Duplicate and mirror.  See mine for placement.  Merge down these 2 layers.

Add your name and copyright.

If you do not want to animate, save as png.

Animation

Select raster 1 and flood fill with white.

Select element 8 layer and duplicate x 2 for a total of 3 layers.

Select the 1st bead doodle and apply eyecandy 4000 HSB Noise with the following settings:




Select the second bead doodle and repeat the HSB noise but click random seed. 

Repeat the above step for the 3rd bead doodle.

Close off bead doodle 2 and 3 by clicking on the eye in the layer palette.

Edit, copy special, copy merged.  Open animation shop and paste as a new animation (ctrl + V).  Back to psp.  Close off bead layer 1 and unhide bead layer 2, Edit, copy special, copy merged.  Back to animation shop and paste after current frame (ctrl + shift + L).  Repeat the above step for the 3rd beaded layer.

View your animation and save as gif.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: Summer Sizzle


This tutorial was written by me on May 2, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Jessica Dougherty Please do not use her artwork without a  proper license. I purchased mine through CILM.  You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Inspired by Jessica Dougherty 30-2 by Chichi Designz.  Thank you for creating this gorgeous kit.  You can purchase this at CDO here.  

Check out Chichi's blog here to see what she has to offer.

Mask WSL_Mask209.  You can download this at weescotslass Creations here.  Thank you for the great masks.

Plug ins: None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 1, copy and paste as a new layer.  Image resize 70%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 5.  Open paper of choice, I am using paper 2, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none and drop shadow the frame.  Move the paper layer under the frame.

Copy your tube and paste as a new layer.  Drop shadow.

Open palm tree, copy and paste as a new layer.  Resize 80% and move to the right.  Move this layer under your tube layer.  See mine for placement.  Duplicate and move slightly down and to the left.

Open grass, copy and paste as a new layer.  Resize 90% and move to the left bottom corner so it ines up with the water. Move this layer just above the frame layer.  Duplicate and mirror.

Open light house, copy and close the original.  Paste as a new layer and resize 70%.  Move this to the left side and move the layer just above raster 1.  See mine for placement.

Open surfboard,  Copy and close the original.  Paste as a new layer and resize 50%.  Move this layer to the bottom right and move this layer under the tube layer.  Drop shadow.  See mine for placement.

Open wordart of choice.  I am uisng wordart shadowed.  Copy and paste as a new layer.  Resize 70% and move to the bottom middle.  See mine for placement.  Drop shadow.

Select raster 1, open paper of choice.  I am using paper 6, copy and paste as a new layer.  Layers, load/save mask, load mask from disk and find WSL mask 209.  Apply the mask and merge group.  Image resize 120% all layers not checked.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Search This Blog

My Blinkie

GWC-Autumn-2019-150x50-final

Proud CT for

CCDCTFor-vi

SBOFBlinkie

karmalized-CTblinkie-vi

LHDCTBlinkiie

RD-blinkie-CT-zpsx9belyds

Followers

Labels