My TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site. Thank you.

Copyright Protected

Everything on my blog is Copyright protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

My Blog List

Monday, February 25, 2013

PTU: Garden Memories


This tutorial was written by me on February 25, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Jonathon Earl Bowser.
Please do not use his artwork without a  proper license.   You can puchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using Inspired by Jonathon Earl Bowser 12-3 by LadyHawwk LHD Scraps.  Thank you for creating this gorgeous kit. 
You can purchase this kit at CDO here

Check out her blog here 
.
Mask: DBV mask 79 by Designs by Vaybs.  Thank you Vaybs for the great masks.  You can download it here.

Plug ins: none.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Copy your middle tube and paste as a new layer. Drop shadow.

Open element 21, copy and close the original.  Paste as a new layer and move to the right side behind your tube.  It should be between the woman and the tree branch.  See mine for placement.

Open element 11, copy and close the original.  Paste as a new layer and resize 60%.  Move this in front of the door and move down a bit.  See mine for placement.

Open element 19, copy and close the original.  Paste as a new layer and move to the left of the woman. Move this under your tube layer.  See mine for placement.

Open element 4, copy and close the original.  Paste as a new layer and resize 60%.  Move to the right of the pillar.  Duplicate, mirror and move to the left of the pillar.  See mine for placement.

Open element 1, copy and paste as a new layer.  Resize 30% and move to the upper left.  The right wind should be touching the top of the pillar.  Drop Shadow.  See mine for placement.

Open paper of choice.  I am using paper 4, Copy and close the original.  Select raster 1 and paste as a new layer. 

Layers/load/save mask/load mask from disk and find DBV mask 79.  Apply your mask and merge group. 

Add your copyright and name.  Save as png.

I hope you enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: Just Dream



This tutorial was written by me on February 20, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Rachel Anderson  Please do not use her artwork without a  proper license.  You can puchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using Inspired by Rachal Anderson 10-1 by Foxy Designz Scraps.  Thank you for creating this gorgeous kit.  You can purchase this gorgeous kit at CDO here
Visit Foxy's blog here.

Mask: WSL Mask 116.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: None

Fonts:  Caviar Dreams here.
         Sabrina here 
.      Pixelette for copyright here.
 These are all FTU fonts.
       
This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 1, copy and close the original.  Paste as a new layer and resize 60%.  Click inside the frame using your magic wand.  Selections, modify, expand by 5.  Copy paper of choice.  I am using paper 4.  Paste as a new layer.  Selections, invert and hit delete on your keyboard.  Open your tube (I am using the one where she sits on the rose)  paste, Using your move tool, move to a spot your like.   Once happy with position, hit delete on your keyboard. Select none and move your paper and tube layers under your frame. Change the blend mode on your tube to soft light. Drop shadow the frame.

Copy your main tube and paste as a new layer Mirror.  Bring this layer to the top.  Move her so she looks like she is sitting on the frame.  Drop shadow.

Open element 1, copy and paste as a new layer, mirror,  Move this layer under the frame and paper layer.  Move the rose down until the lower petal is almost touching the bottom of your canvas.

Open element 5, copy and paste as a new layer.  Resize 25% and move to the bottom of the petal.

Open element 7, copy and paste as a new layer,  Resize 50% and move to the top right corner.  Duplicate and mirror.  Merge down and drag this layer just above your frame layer.

Open element 8, copy and paste as a new layer.  Resize 40% and move to the top left corner of the frame.  Drop shadow.

Open element 14, copy and close the original. Resize 50%   Move to the top middle of the frame.  Move this layer just above the leaf layer.

Open element 15, copy and paste as a new layer.  Resize 25% and move to the top right corner.  Drop shadow.

Open element 4, copy and paste as a new layer.  Resize 60% and move to the bottom left corner. See mine for placement.  Move this layer above raster 1.  Duplicate and move to the right bottom corner. 
Merge down these 2 layers.  Duplicate, mirror and flip.

Select raster 1.  Copy and paste paper of choice.  I am using paper 7.  Layers, load/save mask, load mask from disk and apply your mask.  Merge group.

Word Art:  I am using Caviar Dreams bold Italic and Sabrina. 
Starting with Caviar Dreams Size 72 color #be8c8f in your forground and back ground.  Stroke 2.  Type and word you want.  I typed Dream.  Convert to raster and apply the following inner bevel.  


Move this to the top if it isn't already.  Move to the bottom left corner.  See mine for placement.  Change your background to a darker color.  I used #412c2c.  Hide the forground.  Using Sabrina, stroke 0 size 48 type Just or any word your want.  Convert to raster, drop shadow V/H 1 Opacity 100 blur 5 color black.  repeat but change V/H to -1.

I used Sabrina for my name and applied the same inner bevel.

Add your copyright and name.  Save as png.

I hope you enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Friday, February 15, 2013

CDO - St Patty Day 2013 Snags

Hi Everyone,

CDO has a gorgeous St. Patty Day Collab offer on right now.

Buy any 2 CDO Scrap kits and you will receive the collab for Free.

It is filled with gorgeous kits.

Below are snags using BabyCakes Scraps portion of the kit and Anna Marine's gorgeous artwork.

Both are available at CDO.  The collab offer is only available until February 28th, 2013.

Click on image and then right click and save as.





Hugs,

Gwils
Tuesday, February 12, 2013

PTU: Happy Birthday



This tutorial was written by me on February 12, 2013 and are the

result of my own imagination. Any resemblance to another tutorial is purely coincidental.
This tutorial was written assuming you have working knowledge of PSP.

Supplies needed


I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic PinUp Toons Please do not use
this artwork without a  proper license.  I purchased mine at CILM.  You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Inspired by Pinup Toons kit by Schnegge Scraps
Thank you for creating this gorgeous kit.  You can purchase this
fantastic kit at CDO here.

 Go check out to see what Schnegge has to offer at her blog here.

Mask: Vix Big mask 18.  You can download it here.
 Thank you Vix.

Plug ins: None

Font of choice for your name.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5,
color black through out the tutorial unless otherwise state.

Lets begin,

Open a new 600x600 transparent image.

Open frame 2, copy and paste as a new layer.
Using your magic wand, select inside the frame.  Open paper of choice.  I am using paper 2.  Copy and paste as a new layer, Selections, modify, expand by 3.  Selections, invert and hit delete on your keyboard. Select none.  Move this layer under the frame and add a drop shadow to your frame.

Copy your tube and paste as a new layer.  Drop shadow.

I used the following elements.  Please see my tag for placement Balloons move to the top right behind tube.

Cake 2 resize 60%, move to the bottom left.

Bow 2, Paste and move to the bottom right under your tube.

Wordart 1, resized 80% move to bottom center in front of your tube.  Drop shadow.

Noise makeer, resize 60% move above tube layer and to the bottom left.

Select your paper layer, Select all, float, defloat.  Add a new layer.  Open Gem Scatter, copy and close the original.  Paste into selections, select none.

Present, paste as a new layer and move to the bottom left under the cupcake layer.

Select raster 1.  Open paper of choice.  I am using paper 6, copy and paste as a new layer.  Apply Vix big mask 18 and merge group.  Move to the right a bit.  Duplicate, mirror and flip.

Add your proper credits and name.

Save as png and your done.

I hope you enjoyed my tutorial.

Hugs

Gwils

Search This Blog

My Blinkie

GWC-Autumn-2019-150x50-final

Followers

Labels