TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial is purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may use my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you.

Followers

Blogs I Follow

Friday, September 9, 2016

PTU: Haunted Hallows

This tutorial was written by me on September 9, 2016. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called "Witch Frida" created by Misticheskaya.  Please do not use this tubes without a proper licence.  
You can purchase this beauty at PFD's store here.  

PTU Kit:  I am using Dance in the Rain's gorgeous kit called "Haunting Hallows".  You can purchase this kit at Digi Diva's here

Check out her blog here.

Mask:  Vix Big Mask 1.  You can download it here.

Font of choice for your name.

Plug in: None

I am using a drop shadow (D/S) of V/H 3, Opacity 50, blur 5, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.  

Copy your tube and paste as a new layer.  Resize 50%, all layers not checked and again by 90%.  D/S

Open element 27, copy and close the original.  Select raster 1 and paste.  Resize 90% and move down slightly.

Open element 38, copy and close the original.  Select the head stone layers and paste.  Resize 30% and move to the bottom right.  See mine for placement.  D/S

Open element 52, copy and close the original.  Select the candle layer and paste.  Resize 90% and mirror.  Move to the bottom center.

Open element 53, copy and close the original.  Select raster 1 and paste.  Resize 85% and move to the bottom left, duplicate and mirror.

Open element 50, copy and close the original.  Select raster 1 and paste.  Resize 60% and move to the far right.  See mine for placement.  

Open element 64, copy and close the original.  Select raster 1 and paste.  Resize 30% and move to the upper right so it peeks out from behind the house.  See mine for placement.  

Open element 12, copy and close the original.  Select the house layer and paste.  Resize 20% and move to the upper right so it is in the middle of the moon.  D/S

Open element 81, copy and close the original.  Select the house layer and paste.  Resize 70% and move down slightly.

Open element 32, copy and close the original.  Select the stone road layer and paste.  Resize 70% and move to the left so you see it peeking out from the trees.

Open element 54, copy and close the original.  Select the top layer and paste.  Resize 30% and D/S.  Move to the bottom center.

Open element 90, copy and close the original.  Select the tube layer and paste.  Resize 30% and move to the bottom right so the cat slightly overlaps it.  D/S

Open element 45, copy and close the original.  Select the headstone layer and paste.  Resize 30% and move to the right so it lines up between the 2 headstones.  D/S.

Open element 6, copy and close the original.  Select the tree with skull layer and paste.  Resize 35% and move to the bottom left so it covers the skull.  D/S

Open element 140, copy and close the original.  Select raster 1 and paste.  Resize 80%.  You will see it once we add the paper layer :).

Open element 137, copy and close the original.  Select the cauldron layer and paste.  Resize 40% and mirror.  Move to the top of the cauldron so it looks like it is coming out of it. 

Open element 81, copy and close the original.  Select the cauldron layer and paste.  Resize 20% and move to the bottom left so it is in front of the cauldron.  See mine for placement. 

Open element 23, copy and close the original.  Select the cauldron layer and paste.  Resize 20% and move to the bottom left corner.  D/S

Open paper of choice.  I am using payer 13, copy and close the original.  Select raster 1 and paste.  Apply Vix big mask 1.  Do not merge group yet.  Select the star scatter layer you pasted earlier and move just below the mask layer and above the paper layer.  Merge group.  Duplicate and merge down.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.

I would love to see your results.

Hugs,

Gwils

0 comments:

Post a Comment

Search

My Banner

Gwils Creations blinkie 2

Copyright Protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

I CT for

FDblnk2_byangelsdesignz

Say Hi

Labels