Search

TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you

.

Blog Walk

My CU Licenses

 photo SD_CU4CU_GwilsCreations-1.png

 photo SC_CULicense1.png

 photo NQ-FREECULICENSE.png

 photo Licence1.png

 photo hyshwss4.png

 photo Jenns DesignsCU License.png

 photo WITW LIfetime Unlimited license.png

 photo Scrap and Tubes.png

Monday, September 26, 2016

PTU: Blood Lust

This tutorial was written by me on September 25, 2016. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X9 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called "Dark Princess" created by VeryMany.  Please do not use this tubes without a proper licence.  
You can purchase this beauty at VeryMany's store here.  

PTU Kit:  I am using Dance in the Rain's gorgeous kit called "The Dark & Deadly Village".  You can purchase this kit at Digi Diva's here

Check out her blog here.  

Mask:  WSL mask 222.  You can download it here.

Font of choice for your name.

Plug in: None

I am using a drop shadow (D/S) of V/H 3, Opacity 50, blur 5, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.  

Copy Frame 1 and close the original.  Paste as a new layer and resize 65%, all layers not checked.

Open frame 11, copy and close the original.  Select the first frame layer and paste.  Resize 70%, all layers not checked.  Image, free rotate, 90 degrees to the right, all layers not checked.

Select frame 1 layer.  Using your magic wand, Settings:  Mode: Add(shift) Match mode: RGB Value, Tolerance and Feather: 0, Contiguous and Anti-alias checked, outside.  Select the center of the frame.  Selections, modify, expand by 3.  

Select raster 1 and add a new layer.  

Open paper of choice.  I am using paper 15, copy and close the original.  Standing on the new raster layer, edit, paste into selections.  Select none.  D/S both frames.

Open element 19, copy and close the original.  Select the paper layer and paste.  Resize 70% and move down so you don't see the bottom of the tomb stones.  D/S.

Open element 24, copy and close the original.  Select the paper layer and paste.  Resize 50% and mirror.  Move to the far left side.  See mine for placement.  D/S.

Open element 96, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the bottom center of the frame.  See mine for placement.

Open element 69, copy and close the original.  Select the paper layer and paste.  Resize 35% and mirror.  Move to the far left.  See mine for placement.  D/S 

Copy your tube, Select the paper layer and paste.  Duplicate the tube and bring to the top.  Hide this layer for now.  Back to the original tube layer.  Select the paper layer, select all, float, defloat.  Move your tube until you see her face on the top right corner.  Selections, invert and hit delete on your keyboard.  Select none.  Change the blend mode to screen and lower the opacity to 60%.

Unhide the top tube layer,  Resize 40% and mirror.  Move to the far right side.  D/S.  Move this layer under the skull layer.

Open element 85, copy and close the original.  Select the mansion layer and paste.  Resize 40% and move to the right.  See mine for placement.  D/S

Open element 94, copy and close the original.  Select the top tube layer and paste.  Resize 35% and move to the bottom left corner.

Open element 97, copy and close the original.  Select the top tube layer and paste.  Resize 40% and move to the far left side.  D/S

Open element 42, copy and close the original.  Select the top layer and paste.  Resize 40% and move to the bottom right.  D/S.

Open element 51, copy and close the original.  Select the skull cluster layer and paste.  Resize 25% and D/S.  Move to the far bottom left.  See mine for placement.

Open element 39, copy and close the original.  Select the top layer and paste.  Resize 25% and D/S.  Move to the upper left corner.

Open paper of choice.  I am using paper 8, copy and close the original.  Select raster 1, Select all, Edit, paste into selections.  Select none.  Apply WSL mask 222 and merge group.

Add your copyright and name.

Save as png.

I hope you have enjoyed my tutorial.

I would love to see your results.

Hugs,

Gwils

0 comments:

Post a Comment

Snag My Blinkie

 photo GwilsCreationsblinkie2.gif

Say Hi

Followers

Labels

Blog Archive