TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial is purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may use my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you.

Followers

Blogs I Follow

Wednesday, June 1, 2016

PTU: Memories of you

This tutorial was written by me on June 1, 2016. The results are of my own imagination.  Any resemblance to another tutorial is purely coincidental.  

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Sometimes I may not explain properly where to place things so please see my example if you are ever in doubt :)

Supplies needed

I am using PSP X8 but this tutorial should work with any version.

PTU Tube:  I am using an awesome tube created by 
Enys Guerrero.  The tube I am using is 12-2 Midnight Winter Fairy.  Please do not use this tubes without a proper licence.  
You can purchase this tube at CDO's Store here.  

PTU Kit:  I am using a gorgeous kit called "Julie" created by Cairines Creations. 
This gorgeous kit is exclusive to Digi Diva's Store and can be purchased here

Check out Cairines other products including CU here

Mask:  WSL Mask 84.  You can download it from Weescotslass Creations blog here.

Font of choice for your name.

Plug in: None

I am using a drop shadow (D/S) of V/H 2, Opacity 50, blur 5, color black throughout the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

Copy your tube and paste as a new layer.  Resize 80% all layers not checked, adjust, sharpness, sharpen.  Duplicate your tube layer.  On the duplicate, Adjust Blur, Gaussian blur, radius st to 3.  Change the blend mode to sofe light.  D/S the original tube layer.  Select the top layer again and merge down.

Open element 9, copy and close the original.  Select raster 1 and paste.  Resize 70% all layers not checked.  D/S, duplicate and mirror.  Merge down.

Open element 41, copy and close the original.  Select the flower frame layer and paste.  Resize 70% and D/S.  Merge down to the bottom flower frame.

Using your magic wand (settings are Mode, add shift, Match mode, RGB Value, Tolerance and Feather set to 0, Contiguous and Anti-alias checked).  Click inside the frame.  Selections, modify, expand by 10.

Open paper of choice.  I am using paper 6, copy and close the original.  Select raster 1 and add a new raster layer.  Standing on the new layer, edit, paste into selections.  Select none.

Open element 32, copy and close the original.  Select the frame layer and paste.  Resize 30%, Image, free rotate to the left 40 Degrees, all layers not checked.  D/S  Move to the left so it is just behind the wings.

Open element 17, copy and close the original.  Select the fan layer and paste.  Resize 25% and D/S.  Move to the bottom right of the frame.  Duplicate and mirror.  Move the duplicate to the right so it is closer to the tube but covers the bottom of the fan.  Duplicate this layer and resize 70%.  Move this layer under the fan layer and to the bottom left so it peeks out from under the fan.

Open element 3, copy and close the original.  Select the fan layer and paste.  Resize 25% and move to the bottom right so it peeks out from under the flowers.  Duplicate, image, free rotate to the left 20 degrees.  Move this layer up slightly.  Duplicate this layer and flip.  Move to the top of the flower cluster.  Merge down and repeat.  You should not have one layer with leaves.  Duplicate and mirror.  Move in slightly.  Duplicate this layer and image, free rotate to the right 45 degrees.  Move this layer under the fan layer and move up so it peeks out from under the fan.

Open element 45, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the left side so it is under the blue leaf cluster.  D/S, duplicate and mirror.  Move down and to the left slightly.

Open element 11, copy and close the original.  Select the top layer and paste.  Resize 15% and move to the bottom middle right so it covers the corner of your tube and white flower cluster.  D/S, duplicate and mirror.

Open element 35, copy and close the original.  Select the tube layer and paste.  Resize 15% and move to the bottom left so it peeks out on the left side of the brown flower.  D/S, duplicate and mirror.  Duplicat this layer and move this layer under the fan layer.  Move to the left so it peeks out from under the fan and leaf layer.  It should just cover the top portion of the white cluster layer that is under the fan layer.

Open element 5, copy and close the original.  Select the tube layer and paste.  Resize 15% and move to the bottom left so it peeks out of the top of the 2 flowers.  D/S, duplicate and mirror.  You might have to move the duplicate further to the right to get it in the correct place.

Open element 20, copy and close the original.  Select the tube layer and paste.  Resize 15% and move to the lower left just under the pink flower.  Duplicate and mirror.  You may have to move the duplicate further left.  Duplicate again and move this layer under the pink flower that is under the fan layer.  Move to the top so it peeks out from the top of the flower.

Open element 33, copy and close the original.  Select the tube layer and paste.  Resize 40% and move to the lower right so it peeks out from behind the top pink flower and white leaves.  Using your eraser tool, erase the portion of the string that is sticking out on the left.  Erase up to the top pink flower.  D/S, duplicate and mirror.  Move the duplicate up slightly.

Open element 40, copy and close the original.  Select the top string layer and paste.  Resize 20% and move to the bottom center. D/S

Select the left white leaf layer and duplicate.  Move this to the left side of the center flower.  Move this layer just above the tube layer.  Duplicate and mirror.  Move down and to the left slightly.

Open element 24, copy and close the original.  Select the center blue flower and paste.  Resize 15% and move to the bottom so it is in between the center blue flower and left flower.  D/S, duplicate and mirror.  Move slightly to the right.

Open paper of choice.  I am using paper 10, copy and close the original.  Select raster 1 and paste.  Apply WSL mask 84 and merge group.

Ajust, add/remove noise, add noise Uniform select, Noise 25% and Monochrome checked.

Select your crop tool and select the merge opaque button on the tool bar up top.  Click ok.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

0 comments:

Post a Comment

Search

My Banner

Gwils Creations blinkie 2

Copyright Protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

Say Hi

Labels