Search

TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you

.

Blog Walk

My CU Licenses

 photo SD_CU4CU_GwilsCreations-1.png

 photo SC_CULicense1.png

 photo NQ-FREECULICENSE.png

 photo Licence1.png

 photo hyshwss4.png

 photo Jenns DesignsCU License.png

 photo WITW LIfetime Unlimited license.png

 photo Scrap and Tubes.png

Monday, May 25, 2015

PTU Pirates Life


This tutorial was written by me on May 25, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental. 

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X6 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called Kaley created by SpazzdArt.  Please do not use her tubes without a proper licence.  You can purchase this beauty at her store here.  

PTU Kit:  I am using an awesome kit matching kit for Andrea called Pirates Life by Mellie Beans.  You can purchase this kit at Spazzdart here.

Mask:  WSL Mask 3.  You can download it from WeeScotsLassCreations blog here.  Thank you for the awesome masks.  Open the mask in psp and minimize.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 Transparent image.

Open water splashing paper and paste as a new layer.  Layers, new mask layer, from image and using the drop down, select wsl mask 3. Click ok and merge groups.

Open ship copy and close the original.  Select the mask layer and paste.  Resize 60% and drop shadow.

Open sand, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the bottom centre.  Duplicate this layer and move it to the far left and up slightly.  Move this layer under the original sand layer.  Duplicate one move time and move to the far right.  See mine for placement.

Open Palm Tree, copy and close the original.  Select the middle sand layer and paste.  Resize 60% and move to the far left.  See mine for placement.  Drop shadow.  Duplicate and mirror.

Open rum barrels, copy and close the original.  Select the top layer and paste.  Resize 50% and move to the bottom left.  See mine for placement.  Drop shadow.

Open net, copy and close the original. Select the top layer and paste.  Resize 40% and move to the left so it is sitting on the barrels.  Drop shadow.  See mine for placement.

Open water, copy and close the original.  Select the ship layer and paste.  Resize 80% and move down so it still shows the boat.  See mine for placement.  Duplicate and mirror.

Open splash, copy and close the original.  Select the water layer and paste.  Resize 60% and drop shadow.

Open Kaley, copy and close the original.  Select the top layer and paste.  Resize 12% and drop shadow.  Move her slightly to the left in front of the barrels.  See mine for placement.

Open tropical flower cluster.  Copy and close the original.  Select the top layer and paste.  Resize 25% and mirror.  Move to the far bottom right.  See mine for placement.  Drop shadow.

Open shells 2, copy and close the original.  Select the top layer and paste.  Resize 25% and move to the bottom right.  See mine for placement.  Drop shadow.

Open gun, copy and close the original.  Select the top layer and paste.  Resize 25% and move to the bottom right but closer to the center.  Place it beside the flower cluster.  Drop shadow.

Open gold bars, copy and close the original.  Select the barrel layer and paste.  Resize 25% and move to the far right so it is in front of the tree and behind the flower cluster.  See mine for placement.  Drop shadow.

Open skulls, copy and close the original.  Select the mask layer and paste.  Move up slightly.

Open seagull, copy and close the original.  Select the tube layer and paste.  Resize 25% and again by 90% move down so it is in front of the tubes left foot.  See mine for placement.  Drop shadow.

Open treasure map, copy and close the original.  Select the barrel layer and paste.  Resize 25% and move in front of the barrels under the net.  See mine for placement.

Open Cloud, copy and close the original.  Select the mask layer and paste.  Resize 60% and move to the upper left.  See mine for placement.  Duplicate and move to the far right.

Open chest, copy and close the original.  Select the middle sand layer and  paste.  Resize 20% and move to the left side behind the tree.  See mine for placement.  Drop shadow.

Add any other elements you like.

Add your copyright and name and save as a png.

i hope you like my tutorial.  I would love to see your results.

Hugs,

Gwils


Saturday, May 23, 2015

PTU Kiss my Attitude



This tutorial was written by me on May 23, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental. 

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X6 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called 4 those about to rock created by Keith Garvey.  Please do not use this tubes without a proper licence.  You can purchase this beauty at Garvey's store here.  
 
PTU Kit:  I am using a gorgeous kit called Bad Ass Babe by Abstract Creations.  You can purchase this kit at Abstract Creations Store here

Check out Abstract Creations site here

Mask: WSL mask 148 and 116, open in psp and minimize.  You can download it from WeescotslassCreations here.

Plug ins:  Eyecandy 4000 Gradient Glow

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

Open paper 7, copy and close the  original.  Paste as a new layer.  Layers, new mask layer, from image and find WSL mask 148 in the drop down.  Everything else stays the same.  Apply mask but don't merge group.

Copy your close up tube and paste as a new layer.  Move it to the far left so her eyes show up in the left frame of the mask.  Duplicate and mirror.  Merge down the to tube layers.  Move this layer under the mask layer and above the paper layer.  Change the blend mode to soft light.  Merge group.  Move this layer up slightly.

Open paper 1, copy and close the orginal.  Apply mas wsl mask 116 and merge group.

Open element 38, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the center of the mask layer.  See mine for placement.  Drop shadow.

Copy your main tube and paste.  Resize 80% and drop shadow.

Open element 19, copy and close the original.  Select the city layer and paste.  Resize 60% and move to the bottom right.  See mine for placement.  Drop shadow.

Open element 42, copy and close the original.  Select the city layer and paste.  Resize 45% and move to the far bottom left.  Drop shadow.  Dupicate and move this beside the other barrel and down a bit.  See mine for placement.

Open element 20, copy and close the original.  Select the city layer and paste.  Resize 50% and move to the bottom right corner of the city.  See mine for placement.  Drop shadow.

Open element 31, copy and close the original.  Select the top layer and paste.  Resize 40% and move to the bottom left so it is covering part of the barrels and her foot.  See mine for placement.

Open element 50, copy and close the original.  Select the mask layer and paste.  Resize 45% and move down so you only see the top peaking out from behind the city.

Open element 22, copy and close the original.  Select the top mask layer and paste.  Resize 90% and move down  slightly,  Drop shadow.

Open element 6, copy and close the original.  Select the tube layer and paste.  Resize 35% and move to the bottom left corner.  Drop shadow.  See mine for placement.

Select the top  mask layer and effect, texture effects, weave with the following settings  Gap size 2, Width 30, Opacity 100, weave color black, gap color white fill gaps checked.

Still standing on the tp mask apply gradient glow.  Glow width 8.68 everything else default.  Color #45779f

Add any other elements you like.  Once happy with your tag, add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils



PTU: Facebook timeline Blueberry Delight



This tutorial was written by me on May 23, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental. 

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X6 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous bonus tube March PinUpToons 2013 created by PinUpToons. 
Please do not use this tube without a proper licence.  You can purchase PinUpToons Tubes at CDO here.  

PTU Kit:  I am using an awesome kit called Sweet Blueberry by Mellie Beans.  You can purchase this kit at Mystical Scraps here.

Mask: None.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 815x300 transparent image.

Open paper of choice.  I am using Dark Blue Cardstock.  Copy and close the original.  Select the new image, Select all, edit, paste into selections.  Deselect.

Open flourish rub on and paste as a new layer.  change the blend mode to overlay.

Copy your close up tube and paste as a new layer. Image, mirror and move to the far left.  Change the blend mode to soft light.

Copy your main tube and paste as a new layer.  Move to the far right and down slightly.  Drop shadow.

Open leaf, copy and close the original.  Select the close up layer and paste.  Resize 15% and move to the bottom right just so it is peaking out from the left side of your tube.  Duplicate and move to the top right corner.  Merge down and drop shadow.  See mine for placement.

Open sparkles, copy and close the original.  Select the paper layer and paste.  Move to the far left and down.  See mine for placement.  Paste again and resize 70%.

Open flower 1, copy and close the original.  Select the leaf layer and paste.  Resize 10% and move to the bottom left corner.  Drop shadow.  Duplicate and mirror.

Open flower 2, copy and close the original.  Select the flower 1 layer and paste.  Resize 10% and move to the bottom left so is overlaps flower 1.  Drop shadow.  Duplicate and mirror.

Open flower 3, copy and close the original.  Select the flower 2 layer and paste.  Resize 10% and move to the bottom left so is overlaps flower 2.  Drop shadow.  Duplicate and mirror.

Open pail, copy and close the original.  Select the leaf layer and paste.  Resize 10% and move to the right side so it is peaking out from behind your tube layer.  See mine for placement.  Drop shadow.

Open pie, copy and close the original.  Select the pail layer and paste.  Resize 10% and move to the bottom center.  Drop shadow.

Open blueberries, copy and close the original.  Select the pie layer and paste.  Resize 8% and move to the bottom right of the pie.  Drop shadow and mirror.  See mine for placement.

Copy the left blueberry, and move up so it is peaking out form the pie and lower blueberry.  Move this layer under the pie layer.  See mine for placement.  Duplicate and mirror.

Open tag 1, copy and close the original.  Select the close up layer and paste.  Resize 12% and move to the bottom center so the bottom is sitting under the pie.  See mine for placement.  Drop shadow.

Open Jam, copy and close the original.  Select the tag layer and paste.  Resize 8% and move to the left between the tag and the close up.  See mine for placement.  Drop shadow.

Select raster 1, select all, image crop to selection.  Select all again and add a new raster layer.  Move this to the top.  Selections, modify, selections to boarder with a width of 3.  Flood fill with color of choice.  I used foreground #204377 and background #ecebe8 and created a gradient Linear angel 45 and repeats 3. Add noise Gaussian 50% monochrome checked.

Add any other elements you like.  Add your copyright and name.  Please remember not to include the url for the artist as Facebook does not allow this. 

If you want to make a matching avatar, duplicate this tag and minimize.  Save the original as png or jpg.

Avatar

Maximize the duplicate timeline.  Image resize 70% all layers checked.  Delete the frame layer.

Using your crop tool, set the height and width to 180.  Move the crop box until you find a spot you like and hit enter or click ok. 

Repeat the steps for the frame.  Add your copyright and name and save as png or jpg.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Friday, May 22, 2015

PTU Beauty in Blossom


This tutorial was written by me on May 22, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental. 

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X6 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called Anita created by Verymany.  Please do not use this tubes without a proper licence.  You can purchase this beauty at Verymany's store here.   

PTU Kit:  I am using a gorgeous kit called Blossom by Abstract Creations.  You can purchase this kit at Abstract Creations Store here

Check out Abstract Creations site here

Mask: WSL mask 116, open in psps and minimize.  You can download it from WeescotslassCreations here.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

Copy and paste your main tube,  Resize 40% and drop shadow.

Open paper of choice.  I am using paper 7, copy and paste as a new layer.  Layers, new mask layer, from image, from the drop down find wsl mask 116 and apply mask do not merge group yet. 

Copy your close up tube and paste right below your main tube.  Move to a place you like best.  I moved mine to the far right.  Once happy with placement, move this layer under the mask layer and above the paper layer.  Change the blend mode on the close up to screen or a blend you like.
 Once happy with your close up, merge group.

Open element 7, copy and close the original.  Select the mask layer and paste.  Move down slightly.  Drop shadow.

Open element 8, copy and close the original.  Select the fan layer and paste.  Move down slightly, duplicate and mirror.

Open element 12, copy and close the original.  Select the mask layer and paste.  Move to the far left and down a bit.  See mine for placement.  Drop shadow.

Open element 9, copy and close the original.  Select the top vine layer and paste.  Resize 80% and move to the bottom right.  See mine for placement.  Drop shadow.

Open element 25, copy and close the original.  Select the top layer and paste.  Move to the bottom center and drop shadow.

Open element 1, copy and close the original.  Select the top layer and paste.  Resize 50% and move to the bottom left corner.  See mine for placement.  Drop shadow.

Open WA1, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the bottom center.  Drop shadow.

Open element 44, copy and close the original.  Select the mask layer and paste.  Move to the upper right so it is peaking out from behind the tube layer.  See mine for placement.  Drop shadow.

Open element 2, copy and close the original.  Select the top layer and paste.  Resize 50% and move to the bottom left, right beside the B in beauty.  Drop shadow.

Add any other elements you like.  Once happy with your tag, add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils


 

Thursday, May 21, 2015

PTU: Love my Strawberry Jam



This tutorial was written by me on May 21, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental. 

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X6 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called Breakfast Kitty created by Maryline Cazenave.  Please do not use her tubes without a proper licence.  You can purchase this beauty at CDO here.  

PTU Kit:  I am using an awesome kit called Strawberry Bliss by Mellie Beans.  You can purchase this kit at Mystical Scraps here.

Mask:  I am using the one included in the kit.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 transparent image.

Open Mask, copy and close the original.  Select raster 1 and paste as a new layer.  Resize 80% all layers not checked.

Copy and paste your tube.  Resize 90% and drop shadow.

Open grass 2, copy and close the original.  Select the mask layer and paste.  Resize 80% and move to the bottom so it covers the bottom of the mask.  Move your tube down so it looks like it is sitting on the grass.  Duplicate and move the grass up slightly then move this layer under the original grass layer.

Open grass, copy and close the original.  Select the mask layer and paste.  Move to the far right and drop shadow.  Duplicate and mirror.

Open tree, copy and close the original.  Select the mask layer and paste.  Drop shadow.

Open sun, copy and close the original.  Select the mask layer and paste.

Open pile of strawberries, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the bottom center.  See mine for placement.

Open stone, copy and close the original.  Select the tree layer and paste.  Resize 60% and move to the far middle right.  See mine for placement.

Open daisies, copy and close the original.  Select the tree layer and paste.  Resize 60% and move to the far left.  See mine for placement.  Drop shadow.

Open ladybug, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the left side so the right wing is touching the top cup handle.  Drop shadow.  See mine for placement.

Open butterfly, copy and close the original.  Select the top layer and paste.  Resize 20% and move to the right so it looks like it is just at the top of the rock.  Using your deform tool, turn the butterfly to the left.  Drop shadow.  See mine for placement.

Add any other elements you like.  Once happy with your tag add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Tuesday, May 19, 2015

PTU: Strawberry Love


This tutorial was written by me on May 19, 2015 and are the results of my own imagination.  Any resemblance to another tutorial is purely coincidental. 

Please DO NOT claim this tutorial as your own.

This was written assuming you have working knowledge of PSP.

Please keep in mind that I write the tutorial as I am creating it.

Supplies needed.

I am using PSP X6 but this tutorial should work with any version.

PTU Tube:  I am using a gorgeous tube called Andrea created by SpazzdArt.  Please do not use her tubes without a proper licence.  You can purchase this beauty at her store here.  

PTU Kit:  I am using an awesome kit matching kit for Andrea called Berrylicious by Kizzed by Kelz.  You can purchase this kit at Spazzdart here.

Mask:  WSL Mask 84.  You can download it from Weecscotslass Creations blog here.  Thank you for the awesome masks.  Open the mask in psp and minimize.

Font: of choice for your name.

I am using a drop shadow of V/H 3, Opacity 50, blur 5, color black through out the tutorial unless otherwise stated.

Let's get started.

Open a new 600x600 Transparent image

Copy and paste your tube,  if you are using the same tube as I am resize 17% all layers not checked.  Drop shadow.  Move up slightly.

Select raster 1, open and copy paper of choice.  I am using paper 15.  Paste as a new layer.  Layers, new mask layer, from image, using the drop down locate WSL Mask 84, source luminance checked and invert mask data unchecked.  Click ok and merge group.

Time for some fun and apply elements.

Open element 89, copy and close the original.  Select the mask layer and paste.  Duplicate mirror.  Resize the duplicate image 90% select the original sparkle layer and resize 95%.

Open element 115, copy and close the original.  Select the mask layer and paste.  Resize 80%, drop shadow, duplicate and mirror.

Open element 11, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the bottom center.  Drop shadow. 

Open element 100, copy and close the original.  Select the mask layer and paste.  Resize 95% and move up slightly.  See mine for placement.  Duplicate, mirror and move down.

Open element 101, copy and close the original.  Select the top sparkle layer and paste.  Resize 90% and move down slightly.  See mine for placement.  Drop shadow.

Open element 45, copy and close the original.  Select the top vine layer and paste.  Resize 90% and move down slightly.

Open element 77, copy and close the original.  Select the daisy layer and paste.  Resize 40% and move to the bottom left.  Drop shadow.  See mine for placement.

Open element 120, copy and close the original.  Select the top vine layer and paste.  Resize 70% and move to the left middle side.  See mine for placement.  Drop shadow.  Duplicate and mirror.  Drag the duplicate layer above the strawberry layer.

Add any other elements you like.

Add your copyright and name and save as a png.

i hope you like my tutorial.  I would love to see your results.

Hugs,

Gwils



Snag My Blinkie

 photo GwilsCreationsblinkie2.gif

Say Hi

Followers

Labels

Blog Archive