TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial is purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may use my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you.

Followers

Saturday, November 30, 2013

PTU Frosty Morning

This tutorial was written by me on November 30, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.  Please DO NOT claim this tutorial as your own.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Alex Prihodko.  
Please do not use this artwork without a  proper license.  You can purchase this at PFD.

PTU scrap kit:  I am using Frosty Morning (TS) by Baby Cakes Scraps.  Thank you for creating this fantastic kit.  You can view it at her blog here or purchase it a her store here

Mask:  I am using WSL mask 117.  You can get it at Weescotlass Creations here.

Open a new 600x600 transparent image.

Copy your tube and paste as a new layer.  Resize 40% and drop shadow.

Open element 20, copy and close the original.  Select raster 1 and paste.  Resize 60%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 15.  Open paper of choice.  I am using  paper 10, copy and close the original.  Select the frame layer and paste.  Selections, invert and hit delete on your keyboard.  Do not deselect.  Copy your tube and paste as a new layer.  Move so her face is showing in the center.  Standing on the tube layer hit delete.  Change the blend mode to overlay or a blend mode of choice.  Select none and drop shadow the frame.

Open element 15, copy and close the original.  Select raster 1 and paste.  Resize 90% and drop shadow.

Open element 81, copy and close the original.  Select the top layer and paste.  Resize 20% and move to the bottom left in front of your tubes leg.  Drop shadow.

Open element 68, copy and close the original.  Select raster1 and paste.  Resize 50% and move to the bottom so it looks like your tube is laying on it.  Duplicate and flip.  Move to the bottom right.  See mine for placement.

Open element 74, copy and close the original.  Select the frame layer and paste.  Resize 40% and again by 60%.  Move to the bottom left corner.  Duplicate and mirror.

Open element 51, copy and close the original.  Select the frame layer and paste.  Resize 40% and again by 70%.  Move to the top center of the frame.

Open element 55, copy and close the original.  select the top leaf layer and paste.  Resize 30% and move to the bottom left.  See mine for placement.  Drop Shadow, duplicate and mirror.

Open element 57, copy and close the original.  Select the frame layer and paste.  Resize 60% and move to the left side.  See mine for placement.  Drop shadow.

Open element 47, copy and close the original.  Select the tube layer and paste.  Resize 20% and move to the bottom just right of the candle.  See mine for placement.  Drop shadow.

Open element 48, copy and close the original.  Select the top flower layer (under the tube) and paste.  Resize 20% and move to the bottom center so it is peaking out from behind your tube.  Drop shadow.

Open element 19, copy and close the original.  Select the top flower layer and paste.  Resize 50% and mirror.  Move to the bottom right.  See mine for placement.

Open paper of choice.  I am  using paper 9.  Copy and close the original.  Select raster 1 paste as a new layer.  Apply mask and merge group.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs


Tuesday, November 26, 2013

PTU: Baby it's cold outside

This tutorial was written by me on November 26, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.
This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Jennifer Janesko  Please do not use this artwork without a  proper license.  You can puchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using Inspired by Elizabeth Austin 8-1 by Foxy Designz Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  

Visit Foxy's blog here.

Mask: WSL Mask 116.  You can get this mask at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins: Eyecandy 4000 Gradient glow.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 4, copy and close the original.  Paste as a new layer and resize 70% all layers not checked.  Drop shadow.

Open element 1, copy and close the original.  Select raster 1 and paste.  Resize 70% and move to the left so it shows in the window.  Drop shadow.  Duplicate and mirror.

Open your tube, copy and close the original.  Select the window layer and paste.  Drop shadow.

Open element 4, copy and close the original.  Select the window layer and paste.  Resize 70% and move to the top left corner of the window frame.  Duplicate and mirror.  Merge down and move this layer under the window frame.

Open element 8, copy and close the original.  Select the window frame and paste.  Resize 40% and move to the upper right corner.

Open element 10, copy and close the original.  Select the window layer and paste.  Image, mirror, resize 30% and move to the bottom right corner.  See mine for placement.  Drop shadow.

Open element 19, copy and close the original.  Select the window layer and paste.  Resize 80% and move to the left side of the window.  Drop shadow.

Open element 20, copy and close the original.  Select the candycane layer and paste.  Resize 40% and move to the bottom in front of your candy cane.  Drop shadow.

Open element 7, copy and close the original.  Select the tube layer and paste.  Resize 60% and using your deform tool, turn it so it is level.  Move to the bottom.

Open element 6, copy and close the original.  Select the frame layer and paste.  Resize 40% and move to the bottom right of the frame.  See mine for placement.

Open your word art, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the bottom.  Apply gradient glow.  Basic tab size 5, color tab click medium.

Add any other elements you like.

Hide raster 1 and merge visible.   Resize 90% all layers not checked.  Open paper of choice.  I am using paper 1, copy and close the original.  Select raster 1 and paste.  Apply your mask and merge group. 

Add your name and copyright and save as PNG.

I hope you have enjoyed my tutorial and I would love to see your results.

Hugs,

Gwils
Saturday, November 23, 2013

PTU: Purple Winter

This tutorial was written by me on November 23, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.
This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Michi Art.  Please do not use this artwork without a  proper license.  You can purchase this gorgeous tube at CDO here.  

PTU scrap kit:  This is a gorgeous kit called Amethyst Winter by WDDesignz.  You can purchase it at CDO here.  Visit WWDesignz blog here.

Mask: WSL mask 99,  You can download it from Weescotslass's blog here.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Ok lets get started.

Open a new 600x600 transparent image.

Open element 66, copy and close the original.  Paste as a new layer and resize 80%.

Using your magic wand, click inside the frame.  Selections, modify, expand by 5.  Open paper of choice.  I am using paper 7, copy and close the original.  Paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none.  Move this layer under the frame and drop shadow the frame.

Copy your close up tube and paste as a new layer.  Resize 70% and move up slightly.  Drop shadow.

Open element 6, copy and close the original.  Select raster 1 and paste.  Move to the right side.  Duplicate, flip and mirror.  Merge down the 2 snowflake layers.  Resize 90%.

Open element 11, copy and close the original.  Select the top layer and paste.  Resize 40% and move to the bottom of your tube.  See mine for placement.

Open element 22, copy and close the original.  Select your tube layer and paste.  Resize 60% and move to the bottom of the frame.  Drop shadow.  See mine for placement.

Open element 35, copy and close the original.  Select the frame layer and paste.  Resize 60% and move to left bottom of the frame.  See mine for placement.  Duplicate and mirror.

Open element 8, copy and close the original.  Select the tube layer and paste.  Resize 60% and then image free rotate to the right 90 degrees, all layers not checked.  Move to the bottom center but slightly to the right.  see mine for  placement.  Duplicate and mirror.  Move this layer above the ribbon layer.

Open element 61, copy and close the original.  Select the frame layer and paste.  Resize 60% and Image free rotate to the right 90 degrees.  move to the bottom right.  Duplicate and mirror.  see mine for placement.

Open element 53, copy and close the original.  Select the frame layer and paste.  Resize 60% and move to the top left corner of the frame.  See mine for placement.

Open element 24, copy and close the original.  Select the frame layer and paste.  Resize 40% and mirror.  Move this to the left side under the bow.  See mine for placement.

Open element 42, copy and close the original.  Resize 40% and free rotate to the right 35 degrees.  Move to the upper right side.  See mine for placement.  Drop shadow.

Open element 38, copy and close the original.  Select the top rose layer and paste.  Resize 70%.  Duplicate and mirror.

Open element 36, copy and close the original.  Select the  top snow glitter layer and paste.  Resize 70%.

Open paper of choice.  I am using paper 9, copy and close the original.  Select raster 1 and paste.  Apply mask.  Merge group.  Duplicate and mirror.  Lower the opacity to about 80%.

Add your name and copyright.

Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Wednesday, November 20, 2013

PTU: Urban Chic Timeline



This tutorial was written by me on November 20, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous tube called Angi by Spazzd Art.   

Please do not use her artwork without a  proper license.  You can purchase this awesome tube at Spazzdart here.  

PTU scrap kit: Urban Chic by Abstract Creations.  Thank you for creating this awesome kit.  You can purchase it here.  

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 815x315 transparent image.

Open and copy paper of choice.  I am using paper 1, Back to the timeline, select all and add a new rasterlayer.  Edit and paste into selections.  Select none.

Open close up of choice.  Copy and paste as a new layer.  Resize 50% and move to the right.  Drop shadow.

Open element 37, copy and close the orginal.  Select your paper layer and paste. Move up a bit.

Open element 33, copy and close the original.  Select the skyscrape layer and paste.  Move down so the bumper lines up with the bottom.  Drop shadow.

Open element 51, copy and close the original.  select the car layer and paste.

Open element 43, copy and close the original.  Select the paper layer and paste.  Move to the top left.  See mine for placement.

Open element 19, copy and close the original.  Select the paper layer and paste.  Resize 60% and using your deform tool turn the heart to the right.  Move to the upper right corner.  See mine for placement.

Select your paper layer,  Select all, edit, crop to selection.

Merge visible.

Shift + D to duplicate the banner.  Minimize for now.  

Back to the original banner.

Select all, add a new raster layer, selections, modify, select selections to border.  Width 6, both sides checked. Flood fill with color of choice.  Ajust, add/remove noise.  Add noise 100% monochrome checked. gaussian selected.

Add your copyright and name.  Save as png.

Maximize the dupliate banner.

Resize 70% all layers checked.

Select your crop tool and crop to a wideth and hight of 180.

Select all, add a new raster layer, selections, modify, select selections to border.  Width 4, both sides checked. Flood fill with color of choice.  Ajust, add/remove noise.  Add noise 100% monochrome checked. gaussian selected.

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Saturday, November 9, 2013

PTU: Beauty in Music


This tutorial was written by me on November 9, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Elizabeth Austin.   Please do not use this artwork without a  proper license. You can purchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using Dream World created by Abstract Creations.  Thank you for creating this awesome kit.  You can purchase this gorgeous kit at CDO here.  

Please go and check out Abstract's blog here to check out her awesome kits.

Mask:  WSL_Mask 116.  You can get this at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins:  None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 19, copy and close the original.  Paste as a new layer.

Open your tube, copy and paste as a new layer.  Drop Shadow.

Open element 1, copy and close the original.  Select the heart layer and paste.  Move to the bottom right duplicate and mirror.  see mine for placement.

Open element 6, copy and close the original.  Select raster 1 and paste.

Open element 29, copy and close the original.  Select the top feather layer and paste.  Resize 60% and move to the bottom left side.  See mine for placement.  Drop shadow.

Open element 7, copy and close the original.  Select the heart layer and paste.  Resize 50% and move to the top right corner.  See mine for placement.

Open element 33, copy and close the original.  Select the top layer and paste.  Move to the bottom center.

Open element 15, copy and close the original.  Select the top layer and paste.  Resize 90% and move to the bottom center.  See mine for placement.

Open element 5, copy and close the original.  Select the top feather layer and paste.  Move to the left side.  See mine for  placement.

Open element 4, copy and close the original.  Select the top feather layer and paste.  Mirror and resize 60%.  Move to the bottom right.  See mine for placement.

Open element 23, copy and close the original.  Select raster1 and paste.  Resize 80% and move to the top left.  See mine for placement.

Open paper of choice.  I am using paper 2, copy and close the original.  Select raster 1 and paste.  Apply mask WSL 116 and merge group.

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Sunday, November 3, 2013

PTU: Meet in Autumn Timeline Set


Click on image for larger preview

This tutorial was written by me on November 3, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of JMLeotti.   Please do not use this artwork without a  proper license. You can purchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using a beautiful kit called Inspired by JM Leotti 1-1 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here. This kit can be used with any artist. 

Visit Babycakes blog here to check out her awesome kits.

Mask:  None

Plug In: Eyecandy 4000:  Gradient Glow
 
This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 815 x 315 transparent image.

Open paper of choice.  I am using paper 5, copy and close the original.  Add a new raster layer.  Select all, edit and paste into selections. Select none.

Open element 18, copy and close the original.  Select the paper layer and paste.  Move to the far left, Duplicate and mirror.

Open element 3, copy and close the original.  Paste as new layer.  Using your magic wand, click inside the frame.  Copy your main tube and paste.  Selections, invert.  Using your eraser tool, erase the wings and bottom portion of your tube.  Select none.  Drop shadow the frame.

Open element 10, copy and close the original.  Paste as a new layer.  Resize 60% and move to the far right bottom corner, drop shadow,  duplicate and move slightly to the right and down a bit.  See mine for placement

Open element 27, Image flip.  Move to the bottom left of the frame.  Duplicate and mirror.   Erase the part of the ribbon that overlaps the bottom bow. Merge down.

Open element 29, copy and close the original.  Select the top layer and paste.  Resize 90% all layers not checked.  Move to the upper right side add a gradient glow, basic tab, set the side to 5, color tab, click medium and change the color to #e4cab8.

Open element 9, copy and close the original.  Select the top layer and paste.  Resize 40% and drop shadow.  Move to the right side of the frame so it just covers the top of the ribbon.  Duplicate, mirror and move to the bottom left side between the frame and candles. 

Open element 25, copy and close the original.  Select the top candle layer and paste.  Move to the bottom right, duplicate and mirror.

Add any other elements you would like.

Merge visable.

Shift + D to duplicate your banner and minimize for now.  We will use this for the avatar later.

Back to the banner, Select all, add a new raster layer.   Selections, modify, select selections to border size 6, both sides, anti-alias checked.  Flood fill with #f7d7c5,  Selections, modify, contract by 3 and fill with #952f23, adjust, add remove noise, add noise, Gausian checked, Noise 100, monochrome checked.  Select none.  Drop shadow the frame.  Repeat drop shadow but change the V/H to -2.

Add your name and copyright.  Remember to follow the TOU for the artist and facebook.

Save as png.

Maximize your duplicate.  Image resize 70%.  Select your crop tool and crop to width and height set to 180.  Move the crop box until you find a spot you like and hit enter on your keyboard.

Back to the banner, Select all, add a new raster layer.   Selections, modify, select selections to border size 4, both sides, anti-alias checked.  Flood fill with #f7d7c5,  Selections, modify, contract by 2 and fill with #952f23, adjust, add remove noise, add noise, Gausian checked, Noise 100, monochrome checked.  Select none.  Drop shadow the frame.  Repeat drop shadow but change the V/H to -2.

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Friday, November 1, 2013

PTU: Day of the Dead


This tutorial was written by me on November, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Spazzd Art.   Please do not use her artwork without a  proper license.  You can purchase this beautiful tube at Spazzd art here.  

PTU scrap kit:  I am using a gorgeous kit called Night of the Dead. This kit was created by Heather's Devine Dezigns.  You can purchase this at Spazzdart here.

Mask:  WSL_Mask_116.  You can get it from Weescotslass Creations here

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open paper of choice.  I am using paper 1, copy and close the original.  Paste as a new layer.  Copy your tube and paste as a new layer. Move to the left side and change the blend mode to soft light.  Merge down.  Apply the mask and merge group.

Paste the tube again as a new layer and resize 30% all layers not checked and again by 90%.  Move her up just a little and drop shadow.  See mine for placement.

Open element 18, copy and close the original.  Select the top layer and paste.  Resize 80% and move to the bottom of the frame.

Open element 47, copy and close the original.  Select the mask layer and paste.  Resize 80%.  Image, free rotate to the left 20 degrees, all layers not checked.  move to the bottom left corner of the frame.  See mine for placement.

open element 28, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the bottom right corner.  Drop shadow.

Open element 26, copy and close the original.  Select the mask layer and paste.  Resize 60% and move to the bottom left so it is peaking out from the headstone.  Duplicate and mirror.  See mine for placement.

Open element 58, copy and close the original.  Select the mask layer and paste.  Resize 80% and move to the bottom so it is sticking out under the skulls and brush.  See mine for placement.

Open element 22, copy and close the original.  Select the tube layer and paste.  Resize 70%, mirror and move to the bottom right under the skulls.

Open element 68, copy and close the original.  Select the mask layer  and paste.  Resize 80% and move to the top right side.  Duplicate and flip horizontal.  Duplicate again and move to the top.  See mine for placement.  **Note***if you are using a different version of psp you may have to move the flip copy back over to the right side***

Open element 43, copy and close the original.  Select the mask layer and paste.  Resize 90% and move slightly to the right.

Open element 73, copy and close the original.  Select the tree layer and paste.  Move to the bottom right corner.  See mine for placement.  Duplicate and mirror.

Open element 25, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the bottom center.  See mine for placement.

Open element 46, copy and close the original.  select the tree layer and paste.  Move over slightly to the right.  See mine for placement.

Open element 57, copy and close the original.  Select the tree layer and paste.  Move to the bottom right corner under the black rose.  Duplicate and mirror.  see mine for placement.

Hide the mask layer and tree layers.  Merge visible.  Resize the merged layer by 90%.  Unhide the mask and tree layers.  Move the merged layer down a bit.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Search

My Banner

Gwils Creations blinkie 2

Copyright Protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

I CT for

FDblnk2_byangelsdesignz

2lcy68h

Say Hi

Labels