TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial is purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may use my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you.

Followers

Blogs I Follow

Monday, June 3, 2013

PTU: Kiss


This tutorial was written by me on June 3, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of  PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Michi Art.  Please do not use this artwork without a  proper license.   You can purchase this awesome tube at CDO here.  

PTU scrap kit:  I am using an awesome kit called  Kiss it by Schnegge Scraps.  Thank you for creating this gorgeous kit.  You can purchase this fantastic kit at CDO here.  

Go check out all the stuff Schnegge has to offer on her blog here

Mask:  WSL_Mask 309.  You can get this from Weescotslass Creations here.

Plug ins:

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 1, copy and close the original.  Paste as a new layer and resize 70% and move up and to the left.  Using your magic wand, click inside the frame.  Selections, modify, expand by 5,  Select the close up tube, copy and paste as a new layer.  Using your move tool, move it up so her eye is close the top of the frame.  Selections invert and hit delete on your keyboard.  Select none.  Move the tube under the frame.  Drop shadow the frame.  Change the blend mode on the tube layer to screen.  Don't worry it will have a neat effect once you apply your mask.

Open element 11, copy and close the original.  Select the top layer and paste.  resize 70% and move down and to the right so it overlaps the frame.  See mine for placement.  Using your selections tool, set to circle, mode add (shift) feather 0 anti-alias checked.  Click in the center of the circle and make the selection as large as the metal circle.  Open paper of choice, I am using paper 6, copy and paste as a new layer.  Selections invert and hit delete on the keyboard.  select none.  Drop shadow the frame but change the color to white.  Repeat the drop shadow but change the V/H to -2.

Open your main tube and paste.  Resize 70% and move to the right.  Drop shadow.  Remember to change your color back to black and the V/H to 2.

Open element 25, copy and close the original.  Select the paper layer and paste.  Move down.  See mine for placement.  Drop shadow.

Open element 26, copy and close the original.  Select raster 1 and paste.  Move to the upper left corner.  See mine for placement.

Open element 29, copy and close the original.  Select the top layer and paste.  Resize 60% and move to the left side of the square frame.  See mine for placement.

Open element 24, copy and close the original.  Select the top layer and paste.  Resize 70% and move to the bottom and slightly to the left.  Drop shadow.  See mine for placement.

Open element 22, copy and close the original.  Select the square frame layer and paste.  Move to the right upper corner.  Using your deform tool, tilt it slightly to the right.  See mine for placement.

Open element 5, copy and close the original.  Select the top layer and paste.  Resize 40% and move to the top left corner of the square frame.

Open element 31, copy and close the original.  Select the circle frame and paste as a new layer.  Move to the bottom.

Open element 27, copy and close the original.  Select the tube layer and paste.  Resize 40% and move tot the bottom just to the right of the teddy.  See mine for placement  Drop shadow.

Open element 35, copy and close the original.   Select the paper layer and paste.

Select raster 1, copy and paste paper of choice.  I am using paper 4, Layers, load/save mask, load mask from disk and apply WSL mask 309.  Merge group.

Add your name and copyright.  Save as png.

I hope you enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

0 comments:

Post a Comment

Search

My Banner

Gwils Creations blinkie 2

Copyright Protected

Copyrighted.com Registered & Protected 
3EQE-FVJ8-DNWF-OT53

I CT for

FDblnk2_byangelsdesignz

Say Hi

Labels