Search

TOU

My tutorials are written by me and are the results of my own imagination. Any resemblance to another tutorial are purely coincidental.

Please DO NOT claim any of my tutorials as your own.

You may us my tutorials for challenges but please link to my tutorial on my blog.

You may not translate my tutorials.

DO NOT RIP MY TAGS

If you have any questions regarding my tutorials, please feel free to email me at gwils2007@gmail.com

The supplies for my tutorials are by FTU or PTU designers and were available at the time I created the tutorial. Please contact the designer if you are having trouble downloading from their site.

Thank you

.

Blog Walk

My CU Licenses

 photo SD_CU4CU_GwilsCreations-1.png

 photo SC_CULicense1.png

 photo NQ-FREECULICENSE.png

 photo Licence1.png

 photo hyshwss4.png

 photo Jenns DesignsCU License.png

 photo WITW LIfetime Unlimited license.png

 photo Scrap and Tubes.png

Sunday, April 28, 2013

PTU: Til Death


This tutorial was written by me on April 28, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Enamorte.   Please do not use this artwork without a  proper license.  You can purchase this beautiful tube at CDO here

PTU scrap kit:  I am using Inspired by Enamorte 10-1 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Visit Babycakes blog here to check out her awesome kits.

Mask:  WSL_Mask_194.  You can get it from Weescotslass Creations here.

Plug In:  Eyecandy 4000, Gradient Glow.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 38, copy and paste as a new layer.  Resize 75% all layers not checked.

Click inside the frame using your magic wand,  Selections, modify, expand by 5.  Select raster 1 and add a new raster layer.  Open paper of choice.  I am using paper 5,  select your new raster layer.  Edit, paste into selections, select none.  Drop shadow the frame.

Open your main tube, copy and paste as a new layer.  move to the right and drop shadow.

Open element 31, copy and close the original.  Paste as a new layer and resize 60%.  Move to the bottom left of the frame.  Duplicate and mirror.

Open element 35, copy and close the original.  Paste as a new layer and resize 60%.  Move to the bottom middle on top of the black leaves.  Drop shadow.

Open element 25, copy and close the original.  Paste as a new layer and resize 70%  Move this on top of the rose and drop shadow.  I changed the color to white.

Open element 27, copy and close the original.  Paste as a new layer and resize 50%.  Move to the bottom left.  See mine for placement.  Duplicate and move to the right side and move under the leaves.  See mine for placement.

Open element 34, copy and close the original.  Select your frame layer and paste as a new layer.  Move slightly to the left.  Duplicate and mirror.

Open element 17, copy and close the original.  Select the top sparkle layer and paste as a new layer.  Resize 50% and move to the left middle and drop shadow.  See mine for placement.

Open element 2, copy and paste as a new layer.  Move this layer above your frame layer and move to the top.  Drop shadow.

Open element 12, copy and paste as a new layer.  Resize 70% and move to the bottom of the tag.  Bring this layer to the top if it is not already.  Effects, eyecandy 4, gradient glow.  Basic tab change the Glow Width to 5,  color tab, change the color to #d492eb.  click ok.

Duplicate and move this layer under your tube layer.  Back to the top word art layer.  Using your eraser tool, erase the letters where the back foot is.

Select raster 1 and fill with color or paper of choice.  I am using #d49bea in the foreground and #3d1451 in the back ground.  Make a gradient, Sunburst, Repeats set to 0 and Center and focal points are all at 50.  Layers, load/save mask, load mask from disk and find WSL mask 194.  Apply the mask and merge group.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Sunday, April 21, 2013

PTU Wonderland


This tutorial was written by me on April 21, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Gaetano DiFalco.   Please do not use this artwork without a  proper license. You can puchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Wonderland created by Abstract Creations.  Thank you for creating this awesome kit.  You can purchase this kit at CDO here

Please go and check out Abstract's blog here to check out her awesome kits.

Mask:  WSL_Mask 117.  You can get this at Weescotslass Creations here.  Thank you for creating these great masks.

Plug ins:  None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 53, copy and paste as a new layer.  Resize 80%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 10, Open paper of choice.  I am using paper 4, copy and paste as
a new layer.  Selections, invert and hit delete on your keyboard.  Select none.  Effects, Distortion effects, twirl with the following settings:   

 Effects, edge effects, enhance.  Move this layer under your frame layer.  Drop shadow the frame.

Open your main tube, copy and paste as a new layer.  Drop shadow.

Open element 52 copy and paste as a new layer.  Resize 90% and move to the bottom of your frame.  See mine for placement.

Open element 30, copy and paste as a new layer.  Move to the bottom right corner.  Line up the grass with the bottom of the hill.  Move under your tube layer.

Open element 31, copy and paste as a new layer.  Move to the bottom left corner.  Line up with the other mushrooms.

Open element 32, copy, select your paper layer and paste as a new layer.  Resize 60% and move to the right of the tube.  See mine for placement.  Duplicate and mirror.

Open element 55, copy, select the hill layer and paste as a new layer.  Resize 60% and move to the bottom left.  See mine for placement.

Open element 35, copy, select your tube layer and paste as a new layer.  Resize 60% and mirror.  Move to the bottom right side with the head covering your tube layer slightly.  Drop shadow.

Open element 22, copy, select your tube layer and paste as a new layer.  Resize 40% and move to the bottom left corner.

Open element 20, copy, select your teapot and paste as a new layer.  Resize 40% and move slightly to the right of the teapot.  see mine for placement.

Open element 19, copy and paste as a new layer.  Resize 40% and move in front of the teapot and cup.  See mine for placement.

Open element 51, copy, select your tube layer and paste as a new layer.  Move to the bottom.  Duplicate and mirror.

Open element 12, copy, select raster 1 and paste as a new layer.  Move to the right.  See mine for placement.

Open element 17, copy and paste as a new layer.  Resize 40% and move him so he looks like he is sitting on the mushrooms on the right.  Drop shadow.

Open element 16, copy and paste as a new layer.  Resize 40% and move him to the left so it looks like he is standing on top of the mushrooms.

Select raster 1, open paper of choice.  I am using paper 10,  paste as a new layer and apply mask WSL 117.  Merge group.

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: Sweet as Sugar


Click on image for larger preview
This tutorial was written by me on April 21, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Anna Marine.   Please do not use this artwork without a  proper license.  You can purchase this beautiful tube at CDO here

PTU scrap kit:  I am using Inspired by Anna Marine 46-3 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Visit Babycakes blog here to check out her awesome kits.

Mask:  None

Plug In:  None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x250 transparent image.

Open paper of choice.  I am using paper 4, copy and paste as a new layer.

Open tube, copy and paste as a new layer.  Move to the left side and drop shadow.  Duplicate and mirror.  Change the blend mode to overlay.  Duplicate and change the blend mode to soft light.

Open element 35, copy and paste as a new layer.  Resize 70% and move  up to the top and over to the right.  Drop shadow.  Move this layer above your paper layer.

Open element 6, copy and select your paper layer.  Paste as a new layer.

Open element 31, copy and paste as a new layer.  Bring this layer to the top.  Image resize 40% and move to the bottom right corner.

Open element 2, copy and paste as a new layer.  Move this layer under your tube layer and move to the left.  See mine for placement.

Open element 1, copy and paste as a new layer.  Move this layer under your tube layer.  Move to the bottom left just to the right of the tube.  See mine for placement.

Open element 37, copy and paste as a new layer.  Resize 40% and move to the bottom in front of the lollipop.  See mine for placement.

Open element 4, copy and select your duplicate tube layer.  paste as a new layer and move down slightly.  See mine for placement.

Add any other elements you like.  Once happy with the banner, select the top layer.

Add a new raster layer.  Flood fill with color of choice.  I am using #a47182.  Select all, selections, modify, contract by 5 and hit delete on your keyboard.  Select none.  Adjust, add remove noise, add noise, Gaussian 70% monochrome checked.

Add your copyright and name.  Save as png.  Do not close.

Avatar

Duplicate your banner and close the original.  Delete your copyright and frame layers.  Merge visible.

Resize 80% all layers checked.  Select your crop tool and change your width and height to 150.  Move the crop box to a spot you like and hit the green check mark or hit enter on your keyboard.  Repeat the steps for the frame.

Add your copyright and name or initial and save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: Dragon Beauty


This tutorial was written by me on April 21, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Renee Biertempfel.   Please do not use this artwork without a  proper license.  You can purchase this beautiful tube at CDO here

PTU scrap kit:  I am using Inspired by Renee Biertempfel 8-1 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Visit Babycakes blog here to check out her awesome kits.

Mask:  WSL_Mask_116.  You can get it from Weescotslass Creations here.

Plug In:  Eyecandy 4000, Gradient Glow.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 12, copy and paste as a new layer.  Resize 70%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 5.  Open paper of choice.  I am using paper 3 and paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none.  Move the paper under your frame.  Drop shadow the frame.

Copy your tube and paste as a new layer.  Drop shadow.

Open element 2, copy and paste as a new layer.  Resize 70% and move to the left middle side. Move this layer just above the frame layer. see mine for placement.  Drop shadow.  Duplicate and mirror.

Open element 7, copy and select your top curtain layer.   Paste as a new layer.  Resize 70% and move down and to the left.  Duplicate and mirror.  See mine for placement.

Open element 14, copy and select your top curtain layer.  Paste as a new layer and drop shadow.  Duplicate and mirror.

Open element 18, copy and paste as a new layer.  Resize 70% and move to the bottom of your tag.  See mine for placement.  Eyecandy 4000, gradient glow.  Basic tab change the size to 5 everything else remains the same.  Color tab.  Change your color to #ffa343 and click ok.   If you don't have gradient glow you can use a drop shadow.

Open element 16, copy and paste as a new layer.  Resize 70% and move this under your wordart layer.  Move to the left under the F.  See mine for placement.  Duplicate and mirror.

Open element 11, copy and paste as a new layer.  Resize 60%.  Image, free rotate and rotate to the right 90 degrees.  Move this to the bottom of the word art and drop shadow.  See mine for placement.

Open element 8, copy and paste as a new layer.  Resize 70% and move this layer in between the flower layers.  Move down under the word art.  See mine for placement.

Open element 9, copy and paste as a new layer.  Resize 40% and move this to the bottom right side of the word art.  Apply gradient glow.  Same settings as before.

Open element 3, copy and paste as a new layer.  Resize 40% and move to the top middle.  Move this layer under your tube layer. 

Duplicate and bring this layer to the top.  Move this layer under your wordart layer.

Select raster 1, copy paper of choice.  I am using paper 1, Paste as a new layer and apply WSL mask 116, merge group.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your

results.

Hugs,

Gwils
Saturday, April 13, 2013

PTU Poppy

This tutorial was written by me on April 13, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Enamorte.   Please do not use this artwork without a  proper license.  You can purchase this beautiful tube at CDO here

PTU scrap kit:  I am using Poppy by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here

Visit Babycakes blog here to check out her awesome kits.

Mask: WSL mask 206.  You can get it at Weescotslass creations here.  Thank you for creating these awesome masks.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 26, copy and paste as a new layer.  Resize 70%.  Using your magic wand, click inside each of the frames.  Selections, modify and paste paper of choice.  I am using paper 1, Selections, invert and hit delete on your keyboard.  Select none. Move the paper under the frame and drop shadow the frame.

Copy your tube and paste as a new layer.  Image mirror and drop shadow.

Select raster 1, copy and paste element 16.  Move down to the left.  Duplicate and move to the right and up a bit.

Open element 29, copy and select raster 1, paste as a new layer.  Move to the left a bit.  Duplicate and mirror.

Open element 5, copy and select the top bottom poppy layer and paste.  Resize 60% and move to the right.  See mine for placement.

Open element 24, copy and select your frame layer.  Paste as a new layer and move to the bottom left.  Duplicate and mirror and move down slightly.

Open element 27, copy and select your top pillow layer.  Paste as a new layer.

Open element 25, copy and paste as a new layer.  Resize 60% and move to the bottom right.  Move this layer to the top and drop shadow.

Open element 21, copy and paste as a new layer.  Image resize 60% and mirror.  Move this to the bottom left.  Move this layer under the tube layer and drop shadow.  See mine foe placement.

Open element 1 copy and paste as a new layer.  Move this to the bottom left.  Move this layer under the tube layer.  See mine for placement.

Select raster 1, copy and paste paper of choice.  I am using paper 1.  Layers/load/save mask/load mask from disk and find WSL mask 206.  Apply mask and merge group.  Adjust/add/remove noise/add noise/Gaussian check 50% monochrome checked.

Add your copyright and name.  Save as png.  I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils.

PTU: Forget Me Not


This tutorial was written by me on April 13, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of  PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Anna Liwanag.  Please do not use this artwork without a  proper license.   You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Forget me not kit by Schnegge.  Thank you for creating this gorgeous kit.  You can purchase this fantastic kit at CDO here.  If you purchase the kit there is an add on bonus, 

Go check out all the stuff Schnegge has to offer on her blog here.

Mask:  WSL_Mask 220.  You can get this from Weescotslass Creations here.

Plug ins:  None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 5, copy and paste as a new layer.  Resize 80%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 2.  Open paper of choice.  I am using paper 1, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none.  Move this layer under your frame and drop shadow the frame.

Open your close up tube.  Paste as a new layer and resize 70%.  Move this into the middle of the frame.  Mirror and drop shadow.

Open element 19, copy and paste as a new layer.  Move this to the bottom of your tag.  Drop shadow.

Open element 17, copy and paste as a new layer.  Resize 50% and move to the far left bottom corner and drop shadow.

Open element 3, copy and paste as a new layer.  Resize 80% and move to the left side.  Drop shadow.  Move this layer under your tube layer.

Open element 1, copy and paste as a new layer.  Resize 60% and move to the bottom right of your tag.  Move this layer under your tube layer.  See mine for placement.

Open element 2, copy and paste as a new layer.  Resize 70% and move this layer under your first flower layer.  Move to the bottom right.   See mine for placement.

Open element 7, copy, select your top layer and paste as a new layer.  Resize 60% and move to the bottom right.  See mine for placement and drop shadow.

Select your paper layer.  Open element 10, copy and paste as a new layer.  Resize 90% and move to the middle of the frame.

Open wordart, copy and paste as a new layer.  Resize 40% and move to the bottom middle.  Drop shadow.

Open element 12, copy and paste as a new layer.  Resize 40% and move to the right middle of the frame.  Drop shadow.

Open element 8, copy and paste as a new layer.  Resize 50% and move to the right side.  Move this layer under your tube layer.

Open element 13, copy and paste as a new layer.  Resize 70%.  Move this layer just under your word art.  Duplicate and mirror.

Select raster 1, copy paper of choice.  I am using paper 4.  Layers, load/save mask and find WSL mask 219.  Apply mask and merge group.

Add your name and copyright.  Save as png.

I hope you enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

Spring Lily



This tutorial was written by me on April 7, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Racheal Anderson.   Please do not use this artwork without a  proper license.  You can purchase this beautiful tube at CDO here

PTU scrap kit:  I am using a beautiful kit called Day Lily  by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here

Visit Babycakes blog here to check out her awesome kits.

Mask: WSL_Mask_130.  You can get it at Weescotslass Creations blog here.  Thank you for the great masks.

Plug in:  eyecandy 4, gradient glow.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 11, copy and paste as a new layer.  Resize 70%, using your magic wand, click inside the frame.  Selections, mofify, expand by 5.  Open paper of choice,  I am using paper 5, copy and paste as a new layer.  Selections invert and hit delete on your keyboard.  Select none.  Move the paper layer under the frame.  Drop shadow the frame but change the color to #f1e2f8.  Repeat but change the V/H to -2.

Copy your close up tube and paste as a new layer and drop shadow.
I am using the one with the wings.

Open element 14, copy and paste as a new layer.  Resize 60% and move to the bottom of the tube.  so it covers the tube edge.
Open element 22, copy and paste as a new layer.  Resize 80% and move to the right side of the frame.  Move this layer under the tube layer.  Drop shadow, duplicate and mirror.

Open element 23, copy and paste
as a new layer.  Resize 70% and move to the top of the frame.  Drop Shadow.  Move this layer just above the frame layer.  Duplicate and bring this layer to the top.  Image resize 70% and move to the bottom of the tag.  See mine for placement.

Open element 17, copy and paste as a new layer.  Resize 35% and move to the bottom left side of the lace ribbon.  Drop shadow, duplicate and mirror.

Open element 15, copy and paste as a new layer,  Move to the top middle of the frame.  Move this layer just above the frame layer.  Duplicate and mirror.  See mine for placement.

Open element 19, copy and paste as a new layer.  Resize 30% and move to the bottom left just above the purple lily with the white bow.  Drop shadow.

Open element 9, copy and paste as a new layer.  Resize 40% and move to the bottom right just above the lily with the bow.  Drop shadow but change the color to #f1e2f8.

Open element 24, copy and paste as a new layer.  Resize 60% and move to the bottom middle of your tag.  Using gradient glow, basic setting, change the glow width to 5, color tab, change the color to #e9d6f1.

Open paper of choice.  I am using paper 4, copy and close the original.  Select raster 1 and paste as a new layer.  Layers, Load mask, load/save mask from disk and find mask WSL 130.  Apply mask and merge group.  Resize 120%.

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Wednesday, April 10, 2013

PTU: Glamour


This tutorial was written by me on April 10, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of  PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Gaetano DiFalco. Please do not use this artwork without a proper license.   You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Inspired by PinUp Toons 88-3 by LadyHawwk Designs or LHD Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Check out her LadyHawwk's blog here.

Mask: WSL Mask 223.  You can get it at Weescotslass Creations here.

Plug ins:

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open Frame 1, copy and paste as a new layer.  Resize 80%.  Click inside the frame using the magic wand.  Copy your close up and paste as a new layer.  Move into a spot you like.  Selections, invert.  Using your eraser tool, erase the bottom and left side of the tube.  Select none.  Drop shadow your tube.  Select your frame layer and click inside the frame using the magic wand.  Selections, modify, expand by 5.  Copy paper of choice.  I am using paper 2, paste as a new layer, selections, invert and hit delete on your keyboard.  Select none.  Move the paper layer under the frame.  Drop shadow the frame.

Open element 11, copy and paste as a new layer.  Resize 80% and mirror.  Move over to the far right side and move under the paper layer.  See mine for placement.

Open element 19, copy and paste as a new layer.  Move to the top left corner and move this layer under the paper layer.  Drop shadow.

Open element 13, copy and paste as a new layer.  Resize 40% and mirror.  Place it on the left side on the flower.  Drop shadow.  See mine for placement.

open element 8, copy and paste as a new layer.  Resize 40% and move to the bottom of the frame and drop shadow.

Open element 18, copy and paste as a new layer.  Resize 50% and move to the bottom right of the frame.  See mine for placement.  Drop shadow.

Open element 17, copy and paste as a new layer.  Resize 70% and move to the right lower corner just to the left of the lipstick.  Move this layer under the lipstick layer.  Drop shadow.

Open element 20, copy and paste as a new layer.  Resize 60% and move to the bottom right and place this in between the lipstick and mascara layers.  See mine for placement.  Drop shadow.

Open element 4, copy and paste as a new layer.  Resize 40% and move to the top right of the frame.  Move this layer under your tube layer and drop shadow.

Add any other elements you like.  Once happy with your tag, merge visible and copy .  Delete the original and paste as a new layer.  It will be centered.

Open paper of choice.  I am using paper 4, Select raster 1 and paste as a new layer.  Apply mask WSL 223 and merge group. 

Add your name and copyright.  Save as png.

I hope you enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Monday, April 8, 2013

PTU: Sugar Haven


This tutorial was written by me on April 8, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of PinUp Toons.  Please do not use this artwork without a  proper license.   You can purchase this gorgeous tube at CDO here

PTU scrap kit:  I am using Sugar Mini kit by Schnegge's Scraps.  Thank you for creating this gorgeous kit.  You can purchase this fantastic kit at CDO here

Go check out all the stuff Schnegge has to offer on her blog here.

Mask:  WSL_Mask 220.  You can get this from Weescotslass Creations here.

Plug ins: None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 3, copy and paste as a new layer.  Using your magic wand, click inside the frame. Make sure to click inside the part on the left also.  Copy your close up tube and paste as a new layer.  Resize 80% all layers not checked.  Move her into a spot you like best.  Selections, invert and erase the bottom part of the tube.  Selections, invert, Selections, modify, expand by 5.  Open paper of  choice.  I am using paper 5, paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none.  Drop shadow your frame and tube.

Open ribbon 2, copy and paste as a new layer.  Move down to the bottom of the frame.  

Open flowers 2, copy and paste as a new layer.  Resize 60% and move to the bottom right of the frame.  Drop shadow.

Open Cupcake 2, copy and paste as a new layer.  Resize 60% and move to the bottom left of the frame.  Drop shadow.

Open star 2, copy and paste as a new layer.  Resize  80% and move to the upper right side of the frame.

Open Cake and paste as a new layer.  Resize 60% and move to the bottom left corner.  Move this layer under your tube layer.  Drop shadow.  I also erased the ribbon the was over the cake and erased the dangler and was sticking out from under the cake.

Open scatter 1, copy and paste as a new layer.  Resize 60% and move to the middle of the frame.  Move this layer under your frame and tube layer.  Drop shadow.

Open diamonds, paste as a new layer and resize 60%.  Move this to the bottom middle.

Open glitter, Select Raster 1, copy glitter and paste as a new layer.  Move slightly to the left.  Duplicate and mirror.

Open Butterfly, copy and paste as a new layer.  Mirror and Flip.  Image resize 40% and move to the upper right so it looks like she is looking at the butterfly.  Drop shadow.

Open bottle, paste as a new layer and resize 50%.  Move to the right side of the frame and Dropshadow.  Move this layer under the flower layer.

Select Raster 1, Copy and paste paper of choice.  I am using paper 3, Layers, load/save mask, load mask from disk and find WSL mask 220.  Apply your mask and merge group.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Sunday, April 7, 2013

PTU: A start is born


This tutorial was written by me on April 7, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Amy Matthews.   Please do not use her artwork without a  proper license. You can puchase this gorgeous tube at CDO here

PTU scrap kit:  I am using an awesome kit called Diva by Abstract Creations.  Thank you for creating this gorgeous kit.  You can purchase this gorgeous kit at CDO here

Please go and check out Abstract's blog here to check out her awesome kits.

Mask:  WSL mask 128.  You can get this at Weescotslass Creations here.  Thank you for creating these gorgeous masks.

Plug ins:  None

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 6, copy and paste as a new layer.  Using your magic wand, click inside the middle star frame.  Open your close up tube and paste as a new layer.  Selections invert and erase the bottom part of your tube.  Select none and drop shadow the tube only.  Using your magic wand, click inside the middle frame again.  Selections, modify, expand by 5.  Open paper of choice.  I am using paper 1.  Selections, invert and hit delete on your keyboard.  Select none. 

Repeat for the left and right star.  You can use different paper for each one or the same paper.  I used paper 6 for both.  Move these layers under your frame.  Drop shadow the frame.

Open element 3, copy and paste as a new layer.  Resize 80% and move to the bottom right corner.  Drop shadow.

Open element 4, copy and paste as a new layer.  Resize 80% and move to the bottom right corner.  Just a little left of the back of the shoe.  Move this layer under the shoe layer and drop shadow.

Open element 55, copy and close the original.  Select raster 1 and paste as a new layer.  Resize 80% and move to the top so it lines up with the top of the middle star.

Open element 61. copy and close the original.  Select the martini layer and paste as a new layer.  Resize 80% and move to the bottom.  Drop shadow.

Open element 19, copy and paste as a new layer.  Move to the bottom left corner.  Move this layer under the ribbon layer.

Open element 26, copy and paste as a new layer.  Resize 60% and move to the bottom left corner.  This layer should be above the ribbon layer.

Open element 53, copy and paste as a new layer.  Resize 50% and move to the right corner the lid should line up with the toe of the shoe.   Move this layer under the shoe layer.  Drop shadow.

Open element 46, copy and paste as a new layer.  Move this to the left corner in front of the nail polish.  Drop shadow.

Open element 42, copy and paste as a new layer.  Image, free rotate to the left 90 degrees.  move this layer just above the nail polish layer and move to the bottom.  Drop shadow.

Open element 50, copy and paste as a new layer.  Move this layer just above your tube layer and move to the middle bottom of the tag.

Open element 40, copy and paste as a new layer.  Move this layer just above raster 1, move to the far right side.  Duplicate and move to the right and up a bit.

open element 69, copy and paste as a new layer.  Resize 80% and move this layer just above your top paper layer.  Move to the left, duplicate and mirror.

Select Raster 1 and open paper of choice.  I am using paper 3, paste as a new layer and apply mask WSL 128.  Merge group and resize 110%

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: OMG


This tutorial was written by me on April 7, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of  PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic BamBam Please do not use this artwork without a  proper license.   You can purchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using Inspired by BamBam 27-3 kit by Schnegge.  Thank you for creating this gorgeous kit.  You can purchase this fantastic kit at CDO here.  

Go check out Schnegge's blog here to see her amazing kits.

Mask:  WSL_Mask 128.  You can get this from Weescotslass Creations here.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open frame 1, copy and paste as a new layer.  Using the magic wand, click inside the frame.  Selections, modify, expand by 5.  Open paper of choice, I am using paper 5, copy and paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none and move the paper under the frame. Drop shadow the frame.

Open your tube.  Copy and paste as a new layer,  Resize 90% and move up slightly.  Drop shadow.

Open hat, copy and paste as a new layer.  Resize 50% and move to the bottom left side covering her leg. Drop shadow.

Open Cupcake, Copy and paste as a new layer.  Resize 50% and move to the left side of the hat.  Move this layer under the hat layer.  Drop shadow.

Open shoe, copy and paste as a new layer.  Resize 50% and again by 70% mirror.  Move to the left bottom corner under the hat.  Drop shadow.

Open skull wings, copy and paste as a new layer.  Move this down the the bottom middle.  Move this layer just above your tube layer.

Open Diamonds, copy and paste as a new layer.  Move this to the top left corner of the frame.  Move this layer just above your frame layer.

Open star 1, copy and paste as a new layer.  Move to the bottom right corner and move this layer under your skull layer.  See mine for placement.

Open heart, copy and paste as a new layer.  Resize 70% and move to the bottom right side.  Move this just below the star.  Move this layer under the skull layer.

Open disco ball, copy and paste as a new layer.  Resize 70% and move to the middle right side.  Move this layer under your tube layer.  See mine for placement.

Open doodle, copy and paste as a new layer.  Move this to the left side so it is lined up with the spike.  Move this layer above raster 1,  Duplicate and mirror.

Open star 2, copy and paste as a new layer.  Move this to the left middle side of the frame.  Move this layer under the heart layer.

Select raster 1, open paper of choice.  I am using paper 5, load mask WSL 128 and merge group.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils
Saturday, April 6, 2013

PTU: Rock Star


This tutorial was written by me on April 6, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the gorgeous artwork of Gaetano DiFalco.   Please do not use this artwork without a  proper license.  You can purchase this beautiful tube at CDO here

PTU scrap kit:  I am using Inspired by Gaetano DiFalco 2-2 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Visit Babycakes blog here to check out her awesome kits.

Mask:  WSL_mask 84.  You can download this at Weescotslass Creations here.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 4, copy and paste as a new layer.  Resize 70%.  Using your magic wand, click inside the frame.  Selections, modify, expand by 5.  Select paper of choice.  I am using paper 5, paste as a new layer.  Selections, invert and hit delete on your keyboard.  Copy your close up tube and paste as a new layer,  Move her into a spot you like best and hit delete on your keyboard.  Select none.  Move your frame above the tube and paper layer.  Change the blend mode on your tube layer to Luminance or a blend you like.  Drop shadow the frame.

Open the main tube, copy and paste as a new layer.  Image mirror and move to the right side of the frame.  Drop shadow.

Open element 8, copy and paste as a new layer.  Resize 60% and move to the left side of the frame.  Drop shadow.

Open element 16, copy and paste as a new layer. Resize 60% and move to the bottom in between the guitar and the tubes leg.

Open element 12, copy and paste as a new  layer.  Resize 40% and move to the bottom right side of the frame.  Move this layer just above the frame.

Open element 13, copy and paste as a new layer.  Resize 40% and move just to the left of the first flower.  Duplicate the first flower and move this layer above the purple flower.  Move this slightly to the left of the purple flower.  Repeat this for the purple flower so you have 4 along the bottom of the frame.

Open element 6, copy and paste as a new layer.  Move this layer just above the frame.  Move to the middle right.  See mine for placement.

Open element 18, copy and paste as a new layer.  Resize 60% and move to the top left side of the frame.  Move this layer just above the frame layer.  Drop shadow.

Open element 22, copy and paste as a new layer.  Resize 60% and move to the middle left side of the frame.  Move this layer under the skull layer.

Open element 10, copy and paste as a new layer.  Resize 60% and move to the bottom of the tag.  Drop shadow.

Open paper of choice.  I am using paper 1, copy and paste as a new layer.  Move this layer above raster 1, Apply WSL mask 84.  Merge group.  Move this layer slightly up and to the left, duplicate, mirror and merge down.  Duplicate and flip.

Add your copyright and name.  Save as png.

I hope you have enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: Dreaming of spring


This tutorial was written by me on April 6, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Maryline Cazenave.   Please do not use her artwork without a  proper license.  You can puchase this gorgeous tube at CDO here.  

PTU scrap kit:  I am using a beautiful kit called Garden Party created by Abstract Creations.  Thank you for creating this gorgeous kit.  You can purchase this gorgeous kit at CDO here

Please go and check out Abstract's blog here to check out her awesome kits.

Mask:  WSL mask 3, You can get it at Weescotslass's blog here.
Thank you for creating these great masks.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open element 70, copy and paste as a new layer. 

Open your tube, copy and paste as a new layer,  Resize 90% all layers not checked.  Move your tube down a bit  Drop shadow.

Open element 10, copy and paste as a new layer  Move to the bottom right corner and move this layer under your tube.  Duplicate and mirror.

Open element 55, copy and close the original.  Paste as a new layer and move to the far left top corner.  Move this layer under the tulip layer.  Duplicate and mirror.

Open element 66, copy and close the original.  paste as a  new layer and move to the bottom.

Open element 29, copy and close the original.  Paste as a new layer and resize 30%.  Free rotate to the left 30 Degrees.  Move to the right middle and drop shadow.

Open WA 2, copy and paste as a new layer.  Resize 60% and move to the middle bottom of the tag.  Drop shadow.

Open paper of choice.  I am using paper 3, copy and select raster 1, paste as a new layer. Apply WSL_mask 3 merge group.  Duplicate and merge down.

Add your name and copyright.  Save as png.

I hope you have enjoyed my tutorial.  I would love to to see your

results.

Hugs,

Gwils
Monday, April 1, 2013

PTU: Private Dancer


This tutorial was written by me on April 1, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of  PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Marika.   Please do not use this artwork without a  proper license.  You can purchase this fantastic tube at CDO here

PTU scrap kit:  I am using Inspired by Marika 17-3 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Visit Babycakes blog here to check out her awesome kits.

Mask: WSL mask 59.  You can download it from Weescotslass Creations here.

Plug in:  eyecandy 4 gradient glow (optional)

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 3, copy and paste as a new layer.  Image resize 70% and move down close to the bottom.  Drop shadow.

Open your tube, copy and paste as a new layer.  Image resize 90% and move her down so it looks like she is sitting on the hat.  Drop shadow.

Open element 13, Copy and close the original.  Paste as a new layer and resize 40%.  Move to the left of your tube.  See mine for placement. 

Using your magic wand, click inside the frame.  Selections, modify, expand by 2.  Open paper of choice.  I am using paper 5, copy and close the original.  Add a new raster layer and paste into selections,  Do not deselect.  Open your close up and paste as a new layer.  Move her into a spot you like best.  I am showing her eye.  Selections, invert and hit delete on your keyboard.  change the blend mode to luminance legacy and lower the opacity to about 80%. 

Merge down and move the merged layer under your frame.  Drop shadow the frame.

Open element 6, copy and close the original.  Paste as a new layer and resize 70%.  Image, free rotate, rotate to the right 45 degrees.   Move this layer above raster 1 and over to the left of the tube.  See mine for placement.

Open element 2, copy and paste as a new layer.  Resize 60% and move to the bottom right half of it should be showing from behind your tube.  See mine for placement.

Open element 10, copy and close the original.  Select your frame layer and paste as a new layer.  Resize 60% and move to the bottom left of the tag.  See mine for placement.

Open element 11, copy and close the original.  Paste as a new layer and resize 60%.  Move this just above the corset.  See mine for placement.

Open element 16, copy and close the original.  Select raster 1 and paste as a new layer.

Open element 22, copy and close the original.  Select the top layer and paste as a new layer.  Resize 70% and use either gradient glow basic tab change the width to 5 or drop shadow V/H set to 5 and repeat -5 color #fbb2cb.

Select raster 1, open and copy paper of choice.  I am using paper 5, paste as a new layer and apply WSL mask 59, merge group.

Add your name and copyright.  Save as png and your done.

I hope you enjoyed my tutorial.  I would love to see your results.

Hugs,

Gwils

PTU: Beautiful Dreamer


This tutorial was written by me on April 1, 2013 and are the result of my own imagination. Any resemblance to another tutorial is purely coincidental.

This tutorial was written assuming you have working knowledge of  PSP.

Supplies needed

I am using PSP X4 but this tutorial should work with any version.

PTU Tube:  I am using the fantastic artwork of Jamie Kidd.   Please do not use this artwork without a  proper license.  You can purchase this fantastic tube at CDO here

PTU scrap kit:  I am using Inspired by Jamie Kidd 10-2 by BabyCakes Scraps.  Thank you for creating this gorgeous kit.  You can purchase this kit at CDO here.  This kit can be used with any artist.

Visit Babycakes blog here to check out her awesome kits.

Mask: DBV mask 147.  You can get this at Vaybs blog here.  Thank you Vaybs for the great masks.

This tutorial was written using the supplies above.  If you are using a different tube or scrap kit you may need to make adjustments.  I am using a drop shadow of V/H 2 Opacity 50, blur 5, color black through out the tutorial unless otherwise state.

Open a new 600x600 transparent image.

Open element 33, copy and close the original.  Paste as a new layer and resize 60%.  Using your magic wand, click inside the middle of the frame and each opening of the ribbon but not the bow. 

Selections modify, expand by 4, open paper of choice,  I am using paper 1, paste as a new layer.  Selections, invert and hit delete on your keyboard.  Select none.

Hide the paper layer for now.  Using the magic wand, click inside the frame.  Open the tube and paste as a new layer.  Move into a spot you like.  Selections invert and using the eraser tool, erase the bottom of the tube.  Select none and drop shadow the tube and frame.

Open element 6, copy and close the original.  Paste as a new layer and resize 60%.  Move to the bottom of the frame.  Drop Shadow.

Open element 16, copy and close the original. select your tube layer and paste as a new layer.  Resize 60% and move to the bottom of the frame.  Duplicate and move this layer to the top.  Using your eraser tool, erase parts of the ribbon so it looks like the flower cluster is weaved through it.  Select the bottom ribbon and drop shadow.

Open element 17, copy and close the original.  Select raster 1 and paste as a new layer.   Resize 90% and move up and to the left, duplicate and mirror, merge down.  Duplicate and flip.  See mine for placement.

Open element 34, copy and close the original.  Select the frame layer and paste as a new layer.  Resize 50% and move to the left of the tube.  See mine for placement.  Drop shadow.  Duplicate and mirror.

Open element 24, copy and close the original.  Paste as a new layer and move to the bottom left corner.  Move this layer above the doodle layer.  Duplicate and mirror.

Open element 25, copy and close the original.  Paste as a new layer and move to the bottom middle.  Move this layer in between element 24 layers.  Merge down layers from elements 24 and 25,  Duplicate and flip.

Open element 18, copy and close the original.  Paste as a new layer and resize 70%.  Move this to the bottom and either add gradient glow size 10 color #cacbca or add a drop shadow using the same color.

Select raster and and paste paper of choice.  I am using paper 10.  Apply DBV mask 147 and merge group.

Add your copyright and name.  Save as png and your done

I would love to see your results.

Hugs,

Gwils

Snag My Blinkie

 photo GwilsCreationsblinkie2.gif

Say Hi

Followers

Labels

Blog Archive